From: Yasser Abdullah (yasser@alharbitelecom.com)
Date: Mon Apr 21 2003 - 11:07:23 GMT-3
You can either press # after the dialing the number or modify the
interdigit timeout value using the following voice-port command:
VOIP(config-voiceport)#timeouts interdigit ?
<0-120> seconds
The default is 10 seconds.
Brgds,
Yasser
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
aansar@sscomp.com.sg
Sent: Monday, April 21, 2003 7:25 AM
To: ccielab@groupstudy.com
Subject: voip guru's help pls
VoIP setup, that connect branch offices to the head office PBX (3640
with
E&M (E1 signaling) in HO)
When call progress between two 1751 2V, there is a 18 second silent
between
dialing digits and in getting back ring tone.
This seems not to be happening between 1750 2v.
The configuration is same between 1750 and 1751
Can anybody give me a suggestion to decrease this delay or add some tone
to
this silent period?
Thanks
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:59 GMT-3