Re: OT IP Telephony Caller-ID problems

From: Tony H. (aamercado31@yahoo.com)
Date: Wed Apr 09 2003 - 00:58:14 GMT-3


HI

You probably need to run a deb on the vg200 to find
out whats happening:

http://www.cisco.com/warp/customer/788/voip/callerid_name_del.html

http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121newft/121t/121t3/clid_t4.htm

HTH

--- Brian Sims <BSims_1@msn.com> wrote:
> Hi,
>
> I have the daily duties of implementing voice
> networks of about 40 phones per
> install. I am using a VG200 for the voice gateway.
> I have enabled caller-id
> on my voice ports and the local telephone carrier is
> sending caller-id across
> their analog line but I'm still not getting any
> caller information from an
> outside caller. Anybody have any ideas? I have
> attached a copy of the VG200
> configs to this email. Thanks in advance.
>
> Brian
>
> version 12.1
> no service single-slot-reload-enable
> no service pad
> service timestamps debug datetime msec localtime
> service timestamps log datetime msec localtime
> !
> hostname Flowers-ES-vg200
> !
> logging rate-limit console 10 except errors
> no logging console
> enable secret 5 $1$72BH$38oMBaKLMFhiNS2l6PEbW/
> !
> ip subnet-zero
> no ip finger
> !
> no mgcp timer receive-rtcp
> call rsvp-sync
> !
> !
> interface FastEthernet0/0
> ip address 10.195.0.10 255.255.0.0
> no ip route-cache
> no ip mroute-cache
> duplex auto
> speed auto
> !
> ip default-gateway 10.195.0.1
> ip classless
> ip route 0.0.0.0 0.0.0.0 10.195.0.1
> no ip http server
> !
> voice-port 1/0/0
> !
> voice-port 1/0/1
> !
> voice-port 1/1/0
> connection plar 25002
> description 260-1015
> caller-id enable
> !
> voice-port 1/1/1
> connection plar 25002
> description 260-1047
> caller-id enable
> !
> dial-peer voice 1 pots
> destination-pattern 9T
> port 1/1/0
> !
> dial-peer voice 2 pots
> destination-pattern 9T
> port 1/1/1
> !
> dial-peer voice 100 voip
> destination-pattern 250..
> session target ipv4:10.5.0.11
> dtmf-relay h245-alphanumeric
> codec g711ulaw
> no vad
> !
> line con 0
> !
> line aux 0
> line vty 0 4
> login



This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3