From: Yinka Daramola (o_daramola@hotmail.com)
Date: Wed Apr 09 2003 - 01:10:24 GMT-3
There could be a number of things wrong with this setup ranging from IOS
version to signalling voltage. If you're not in the US, you may be having
common the cptone setting issue, which defualts to "us" and "northamerica"
for 2600/3600 and MC3810 respectively. The link below should help you
troubleshoot the problem in a step-by-step manner.
http://www.cisco.com/en/US/products/sw/iosswrel/ps1834/products_feature_guid
e09186a008009cc4b.html#1049184
Yinka Daramola
CCNA, CCNP, MCSE, RHCE,CCIE#11331
Network Consultant
Red Hat Inc.
Tel: 425-827-4498
----- Original Message -----
From: "Brian Sims" <BSims_1@msn.com>
To: "boby2kusa" <boby2kusa@hotmail.com>; <ccielab@groupstudy.com>
Sent: Tuesday, April 08, 2003 6:13 PM
Subject: Re: IP Telephony Caller-ID problems
> There is a CallManager and Cisco Unity server. The VG200 is a H323
gateway
> at every location.
> ----- Original Message -----
> From: "boby2kusa" <boby2kusa@hotmail.com>
> To: "Brian Sims" <BSims_1@msn.com>; <ccielab@groupstudy.com>
> Sent: Tuesday, April 08, 2003 11:35 AM
> Subject: Re: IP Telephony Caller-ID problems
>
>
> > Not enough information. is there a call manager? Is vg200 a H.323 or
> MGCP
> > gateway?
> > ----- Original Message -----
> > From: "Brian Sims" <BSims_1@msn.com>
> > To: <ccielab@groupstudy.com>
> > Sent: Monday, April 07, 2003 6:44 PM
> > Subject: IP Telephony Caller-ID problems
> >
> >
> > > Hi,
> > >
> > > I have the daily duties of implementing voice networks of about 40
> phones
> > per
> > > install. I am using a VG200 for the voice gateway. I have enabled
> > caller-id
> > > on my voice ports and the local telephone carrier is sending caller-id
> > across
> > > their analog line but I'm still not getting any caller information
from
> an
> > > outside caller. Anybody have any ideas? I have attached a copy of
the
> > VG200
> > > configs to this email. Thanks in advance.
> > >
> > > Brian
> > >
> > > version 12.1
> > > no service single-slot-reload-enable
> > > no service pad
> > > service timestamps debug datetime msec localtime
> > > service timestamps log datetime msec localtime
> > > !
> > > hostname Flowers-ES-vg200
> > > !
> > > logging rate-limit console 10 except errors
> > > no logging console
> > > enable secret 5 $1$72BH$38oMBaKLMFhiNS2l6PEbW/
> > > !
> > > ip subnet-zero
> > > no ip finger
> > > !
> > > no mgcp timer receive-rtcp
> > > call rsvp-sync
> > > !
> > > !
> > > interface FastEthernet0/0
> > > ip address 10.195.0.10 255.255.0.0
> > > no ip route-cache
> > > no ip mroute-cache
> > > duplex auto
> > > speed auto
> > > !
> > > ip default-gateway 10.195.0.1
> > > ip classless
> > > ip route 0.0.0.0 0.0.0.0 10.195.0.1
> > > no ip http server
> > > !
> > > voice-port 1/0/0
> > > !
> > > voice-port 1/0/1
> > > !
> > > voice-port 1/1/0
> > > connection plar 25002
> > > description 260-1015
> > > caller-id enable
> > > !
> > > voice-port 1/1/1
> > > connection plar 25002
> > > description 260-1047
> > > caller-id enable
> > > !
> > > dial-peer voice 1 pots
> > > destination-pattern 9T
> > > port 1/1/0
> > > !
> > > dial-peer voice 2 pots
> > > destination-pattern 9T
> > > port 1/1/1
> > > !
> > > dial-peer voice 100 voip
> > > destination-pattern 250..
> > > session target ipv4:10.5.0.11
> > > dtmf-relay h245-alphanumeric
> > > codec g711ulaw
> > > no vad
> > > !
> > > line con 0
> > > !
> > > line aux 0
> > > line vty 0 4
> > > login
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3