From: Bobby (bobby1@ctimail3.com)
Date: Thu Feb 20 2003 - 23:01:23 GMT-3
Hi Friends,
If in the lab we were asked to configure a back to back fr connection
whether the following config is ok :
R5
interface Serial1
ip address 200.100.2.1 255.255.255.0
encapsulation frame-relay
no keepalive
frame-relay map ip 200.100.2.2 102 broadcast
R6
interface Serial0/0
ip address 200.100.2.2 255.255.255.0
encapsulation frame-relay
no keepalive
clockrate 64000
frame-relay map ip 200.100.2.1 102 broadcast
I was told that they will not accept the above config. Is there
any other way do it.
Thanks
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3