From: fingham@cox.net
Date: Fri Jan 31 2003 - 19:28:59 GMT-3
Sage: Newest RFC is 2225. Selector byte should be 00 in all ESI addresses.
Noted in another reply that the selector byte should match subinterface number - not so - haven't seen this since I did my last LANE configuration.
Cheers, Fred
>
> From: Sage Vadi <sagevadi@yahoo.co.uk>
> Date: 2003/01/31 Fri AM 08:14:29 EST
> To: ccielab@groupstudy.com
> Subject: ATM: RFC-1577 Classical IP and ARP over ATM
>
> Hi all,
>
> ~ARP Server (R1)~
> interface ATM3/0.1 multipoint
> ip address 155.100.5.1 255.255.255.0
> atm esi-address 111111111111.11
> atm arp-server self
>
> ~ARP Client (R2)~
> interface ATM3/0.1 multipoint
> ip address 155.100.5.2 255.255.255.0
> atm esi-address 222222222222.22
> atm arp-server nsap
> 47.00918100000000902B03E001.111111111111.11
>
> NB: for ease of reading I have removed ATM physical
> interface config - but they are all correct.
>
> Q) I cannot PING each other's interface. I cannot see
> the atm arp mapping (show atm arp) neither.
>
> The LS101/ATM switch is setup default vanilla - with
> ilmi enabled. According to configs on CCO, there
> doesn't seem to indicate that I need to configure SVCs
> on the LS1010.
>
> Help/hints/tips appreciated.
> Cheers,
> Sage
>
> __________________________________________________
> Do You Yahoo!?
> Everything you'll ever need on one web page
> from News and Sport to Email and Music Charts
> http://uk.my.yahoo.com
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:00 GMT-3