From: dredeze (dredeze@hotmail.com)
Date: Fri Jan 31 2003 - 19:34:13 GMT-3
Use a send-community statement between router 1 and router 2. Create a
route-map and access-list matching that route within route use the
option no-export
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Evgeny Tantsura
Sent: Wednesday, January 29, 2003 8:34 AM
To: Gustavo Figueira
Cc: ccielab@groupstudy.com
Subject: Re: BGP
On R2 stamp 40.40.40.4 with community no-advertise
> Hi group,
>
> I have the following topology:
>
>
> R4-----ibgp-----R1------ebgp------R2--------ebgp-----R5
>
>
> R4 and R1 are in the AS19
> R2 are in the AS65019 and
> R5 are in the AS254
>
> I am announcing loopback 40.40.40.4 in the R4. R5 has the net in its
table
> BGP, however, can't announces it. The network 40.40.40.0 has that to
die in
> the AS254. How I make this?
>
> I don't have access to the R5.
>
> Thank's
>
> Gustavo
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:00 GMT-3