From: Tim O'Brien (tobrien@cinci.rr.com)
Date: Fri Jan 31 2003 - 19:53:35 GMT-3
Jim,
Looks like the NPE-G1 offers three Gigabit Ethernet/Fast Ethernet ports
built right into the NPE that do not take up bandwidth points....
http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet0918
6a00800c6bd6.html
Tim
CCIE 9015, CSS1
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
jim.phillipo@guardent.com
Sent: Friday, January 31, 2003 3:28 PM
To: ccielab@groupstudy.com
Subject: OT:Cisco NPE-G1 Capacity
Anyone using the NPE-G1 ? We are looking into some major purchasing and this
NPE is high on the list. The biggest concern is Bandwith points allowed on
the 7206 using this NPE.
Does anyone know how rigid these allowances are ? The G1 is allowed 600 per
side. We had wanted to use 3 dedicated GIG cards but that puts us at 1200
points right off. We intend on putting about 100 MEGS through the box so it
wont come near the 3 GIG of the 3 interfaces.
Any input would be aprecated.
Jim
Jim Phillipo, CCNP, CCDP
Sr. Internetworking Engineer
W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
90 Royal Little Drive, Providence, RI 02904
www.guardent.com
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:00 GMT-3