From: Frank Jimenez (franjime@cisco.com)
Date: Sun Feb 02 2003 - 00:31:17 GMT-3
A good 'how-to order' presentation (watch the word wrap)
http://www.cisco.com/application/vnd.ms-powerpoint/en/us/guest/products/
ps341/c1161/ccmigration_09186a008009184d.ppt
Basically, different types of adapters take up various bandwidth points
depending on the type of interface, number of ports, etc. It is
possible to exceed the capacity of the bus, memory or CPU of the router
by putting in too many high-speed interfaces.
Frank Jimenez, CCIE #5738
franjime@cisco.com
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jerry
Sent: Saturday, February 01, 2003 9:46 AM
To: Brian Dennis; ccielab@groupstudy.com
Subject: Re: Cisco NPE-G1 Capacity
Thanks Brian. Is this analogous to a blocking / non-blocking switch or
nothing to do with it?
Jerry
----- Original Message -----
From: Brian Dennis <brian@labforge.com>
To: 'Jerry' <phase90@comcast.net>; <ccielab@groupstudy.com>
Sent: Friday, January 31, 2003 11:01 PM
Subject: RE: Cisco NPE-G1 Capacity
> With the 7200 series routers there are a total number of bandwidth
> points that a chassis can support. Each service adapter (SA), port
> adapter (PA) or I/O controller uses a certain number of bandwidth
> points depending on the type of adapter.
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial/Security) brian@labforge.com
> http://www.labforge.com
>
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Jerry
> Sent: Friday, January 31, 2003 4:15 PM
> To: Tim O'Brien; jim.phillipo@guardent.com; ccielab@groupstudy.com
> Subject: Re: Cisco NPE-G1 Capacity
>
> Please gentlemen, what is a bandwidth point???
>
>
> Jerry
> ----- Original Message -----
> From: Tim O'Brien <tobrien@cinci.rr.com>
> To: <jim.phillipo@guardent.com>; <ccielab@groupstudy.com>
> Sent: Friday, January 31, 2003 5:53 PM
> Subject: RE: Cisco NPE-G1 Capacity
>
>
> > Jim,
> >
> > Looks like the NPE-G1 offers three Gigabit Ethernet/Fast Ethernet
> ports
> > built right into the NPE that do not take up bandwidth points....
> >
> >
>
http://www.cisco.com/en/US/products/hw/routers/ps341/products_data_sheet
> 0918
> > 6a00800c6bd6.html
> >
> > Tim
> > CCIE 9015, CSS1
> >
> >
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
> Of
> > jim.phillipo@guardent.com
> > Sent: Friday, January 31, 2003 3:28 PM
> > To: ccielab@groupstudy.com
> > Subject: OT:Cisco NPE-G1 Capacity
> >
> >
> > Anyone using the NPE-G1 ? We are looking into some major purchasing
> and
> this
> > NPE is high on the list. The biggest concern is Bandwith points
> allowed on
> > the 7206 using this NPE.
> >
> > Does anyone know how rigid these allowances are ? The G1 is allowed
> 600
> per
> > side. We had wanted to use 3 dedicated GIG cards but that puts us at
> 1200
> > points right off. We intend on putting about 100 MEGS through the
box
> so
> it
> > wont come near the 3 GIG of the 3 interfaces.
> >
> > Any input would be aprecated.
> >
> > Jim
> >
> > Jim Phillipo, CCNP, CCDP
> > Sr. Internetworking Engineer
> > W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
> > 90 Royal Little Drive, Providence, RI 02904
> > www.guardent.com
> > _____________________________________________________
> > G U A R D E N T
> > Security | Privacy | Data Protection
> > .
> .
.
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:00 GMT-3