From: MADMAN (dave@interprise.com)
Date: Fri Jan 31 2003 - 18:44:14 GMT-3
The bandwidth points on a 7206 with a NPE-G1 is not applicable!!
That's one of the great points of this NPE, there is no bandwidth points
limitation. Also you don't need an I/O card but you can install one and
use the LAN ports if you so desire.
Dave
jim.phillipo@guardent.com wrote:
> Anyone using the NPE-G1 ? We are looking into some major purchasing and this
> NPE is high on the list. The biggest concern is Bandwith points allowed on
> the 7206 using this NPE.
>
> Does anyone know how rigid these allowances are ? The G1 is allowed 600 per
> side. We had wanted to use 3 dedicated GIG cards but that puts us at 1200
> points right off. We intend on putting about 100 MEGS through the box so it
> wont come near the 3 GIG of the 3 interfaces.
>
> Any input would be aprecated.
>
> Jim
>
> Jim Phillipo, CCNP, CCDP
> Sr. Internetworking Engineer
> W: 401.456.1821 F: 401.456.0599 M: 508.982.8923
> 90 Royal Little Drive, Providence, RI 02904
> www.guardent.com
> _____________________________________________________
> G U A R D E N T
> Security | Privacy | Data Protection
> .
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill .
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:00 GMT-3