From: Haolee HT Geng (genght@cn.ibm.com)
Date: Sun Dec 15 2002 - 10:09:37 GMT-3
Joe,
How do u think "ip rtp priority" is for "per call bandwidth"? Any
reference?
tks.
"Joe Chang"
<changjoe@earthli To: "GroupStudy \(E-mail\)" <ccielab@groupstudy.com>
nk.net> cc:
Sent by: Subject: Re: VoIP Bandwidth
nobody@groupstudy
.com
2002-12-13 07:18
Please respond to
"Joe Chang"
As a "gee insn't that neat but useless" addendum: reserving per-call
bandwidth utilizing RTP is possible, but under a different set of RTP
related commands:
interface s0/0.1 point-to-point
bandwidth 1500
ip rtp priority 16384 16484 20000 <---- reserves per call bandwidth of
20 kbps, in bps
max-reserved-bandwidth 20 <---- 20% of interface bandwidth
( 300 kbps)
The syntax of "ip rtp priority" and "frame-relay ip rtp priority" , but the
latter reserves aggregate bandwidth in kbps.
----- Original Message -----
From: "Hedi Abdelkafi" <Hedi.Abdelkafi@simac.lu>
To: "Bauer, Rick" <BAUERR@toysrus.com>; "GroupStudy (E-mail)"
<ccielab@groupstudy.com>
Sent: Thursday, December 12, 2002 12:54 PM
Subject: RE: VoIP Bandwidth
> Hi,
>
> Thanks a lot for your help.
>
> In fact, I need to use RSVP instead of IP RTP Priority.
>
> If I configure as the following
> ip rsvp bandwidth 300 20
>
> Is it correct ?
>
> -----Original Message-----
> From: Bauer, Rick [mailto:BAUERR@toysrus.com]
> Sent: jeudi 12 dicembre 2002 17:43
> To: Hedi Abdelkafi
> Subject: RE: VoIP Bandwidth
>
>
> How about RSVP?
>
> Rick, #9482
>
> -----Original Message-----
> From: Hedi Abdelkafi [mailto:Hedi.Abdelkafi@simac.lu]
> Sent: Thursday, December 12, 2002 11:08 AM
> To: GroupStudy (E-mail)
> Subject: VoIP Bandwidth
>
> Hi,
>
> In a lab test, I was asked to do the following.
> Configure bandwidth management on the DLCI xx with the following
> requirements :
> * Voice traffic can reserve a maximum of 300 Kbps.
> * Each session can be allocated a maximum of 20 Kbps.
>
> I think I need to use frame-relay ip rtp priority 16384 16383 300 for the
> first requirement (in the map-class).
> What about the second requirement ?
>
> Bye
> .
> ========================================================================
> This email message is for the sole use of the intended recipient (s) and
may
> contain confidential and privileged information. Any unauthorized review,
> use, disclosure or distribution is prohibited. If you are not the
intended
> recipient, please contact the sender by reply email and destroy all
copies
> of the original message. To reply to our email administrator directly,
send
> an email to EmailAdmin@toysrus.com.
> Toys "R" Us, Inc.
> .
.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:46 GMT-3