VoIP Bandwidth

From: Hedi Abdelkafi (Hedi.Abdelkafi@simac.lu)
Date: Thu Dec 12 2002 - 13:07:40 GMT-3

• Next message: Hedi Abdelkafi: "Access-list with port monitoring"
• Previous message: Hedi Abdelkafi: "CHAP authentication"
• Next in thread: Hedi Abdelkafi: "RE: VoIP Bandwidth"
• Maybe reply: Hedi Abdelkafi: "RE: VoIP Bandwidth"
• Maybe reply: Joe Chang: "Re: VoIP Bandwidth"
• Maybe reply: Haolee HT Geng: "Re: VoIP Bandwidth"
• Maybe reply: Joe Chang: "Re: VoIP Bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hi,

In a lab test, I was asked to do the following.
Configure bandwidth management on the DLCI xx with the following requirements :
* Voice traffic can reserve a maximum of 300 Kbps.
* Each session can be allocated a maximum of 20 Kbps.

I think I need to use frame-relay ip rtp priority 16384 16383 300 for the first requirement (in the map-class).
What about the second requirement ?

Bye
.

• Next message: Hedi Abdelkafi: "Access-list with port monitoring"
• Previous message: Hedi Abdelkafi: "CHAP authentication"
• Next in thread: Hedi Abdelkafi: "RE: VoIP Bandwidth"
• Maybe reply: Hedi Abdelkafi: "RE: VoIP Bandwidth"
• Maybe reply: Joe Chang: "Re: VoIP Bandwidth"
• Maybe reply: Haolee HT Geng: "Re: VoIP Bandwidth"
• Maybe reply: Joe Chang: "Re: VoIP Bandwidth"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3