From: Hedi Abdelkafi (Hedi.Abdelkafi@simac.lu)
Date: Thu Dec 12 2002 - 13:54:51 GMT-3
Hi,
Thanks a lot for your help.
In fact, I need to use RSVP instead of IP RTP Priority.
If I configure as the following
ip rsvp bandwidth 300 20
Is it correct ?
-----Original Message-----
From: Bauer, Rick [mailto:BAUERR@toysrus.com]
Sent: jeudi 12 dicembre 2002 17:43
To: Hedi Abdelkafi
Subject: RE: VoIP Bandwidth
How about RSVP?
Rick, #9482
-----Original Message-----
From: Hedi Abdelkafi [mailto:Hedi.Abdelkafi@simac.lu]
Sent: Thursday, December 12, 2002 11:08 AM
To: GroupStudy (E-mail)
Subject: VoIP Bandwidth
Hi,
In a lab test, I was asked to do the following.
Configure bandwidth management on the DLCI xx with the following
requirements :
* Voice traffic can reserve a maximum of 300 Kbps.
* Each session can be allocated a maximum of 20 Kbps.
I think I need to use frame-relay ip rtp priority 16384 16383 300 for the
first requirement (in the map-class).
What about the second requirement ?
Bye
.
========================================================================
This email message is for the sole use of the intended recipient (s) and may
contain confidential and privileged information. Any unauthorized review,
use, disclosure or distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and destroy all copies
of the original message. To reply to our email administrator directly, send
an email to EmailAdmin@toysrus.com.
Toys "R" Us, Inc.
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:44 GMT-3