From: Joe Chang (changjoe@earthlink.net)
Date: Sun Dec 15 2002 - 20:10:33 GMT-3
Hi Haolee,
Looking at the docs again, I realize I got this command completely wrong.
The bandwidth parameter for "ip rtp priority" is for aggregate voice traffic
and is in kbps. Sorry folks !
----- Original Message -----
From: "Haolee HT Geng" <genght@cn.ibm.com>
To: <ccielab@groupstudy.com>
Sent: Sunday, December 15, 2002 9:09 AM
Subject: Re: VoIP Bandwidth
> Joe,
>
> How do u think "ip rtp priority" is for "per call bandwidth"? Any
> reference?
>
> tks.
>
>
>
>
> "Joe Chang"
> <changjoe@earthli To: "GroupStudy
\(E-mail\)" <ccielab@groupstudy.com>
> nk.net> cc:
> Sent by: Subject: Re: VoIP
Bandwidth
> nobody@groupstudy
> .com
>
>
> 2002-12-13 07:18
> Please respond to
> "Joe Chang"
>
>
>
>
>
> As a "gee insn't that neat but useless" addendum: reserving per-call
> bandwidth utilizing RTP is possible, but under a different set of RTP
> related commands:
>
> interface s0/0.1 point-to-point
> bandwidth 1500
> ip rtp priority 16384 16484 20000 <---- reserves per call bandwidth
of
> 20 kbps, in bps
> max-reserved-bandwidth 20 <---- 20% of interface bandwidth
> ( 300 kbps)
>
> The syntax of "ip rtp priority" and "frame-relay ip rtp priority" , but
the
> latter reserves aggregate bandwidth in kbps.
>
> ----- Original Message -----
> From: "Hedi Abdelkafi" <Hedi.Abdelkafi@simac.lu>
> To: "Bauer, Rick" <BAUERR@toysrus.com>; "GroupStudy (E-mail)"
> <ccielab@groupstudy.com>
> Sent: Thursday, December 12, 2002 12:54 PM
> Subject: RE: VoIP Bandwidth
>
>
> > Hi,
> >
> > Thanks a lot for your help.
> >
> > In fact, I need to use RSVP instead of IP RTP Priority.
> >
> > If I configure as the following
> > ip rsvp bandwidth 300 20
> >
> > Is it correct ?
> >
> > -----Original Message-----
> > From: Bauer, Rick [mailto:BAUERR@toysrus.com]
> > Sent: jeudi 12 dicembre 2002 17:43
> > To: Hedi Abdelkafi
> > Subject: RE: VoIP Bandwidth
> >
> >
> > How about RSVP?
> >
> > Rick, #9482
> >
> > -----Original Message-----
> > From: Hedi Abdelkafi [mailto:Hedi.Abdelkafi@simac.lu]
> > Sent: Thursday, December 12, 2002 11:08 AM
> > To: GroupStudy (E-mail)
> > Subject: VoIP Bandwidth
> >
> > Hi,
> >
> > In a lab test, I was asked to do the following.
> > Configure bandwidth management on the DLCI xx with the following
> > requirements :
> > * Voice traffic can reserve a maximum of 300 Kbps.
> > * Each session can be allocated a maximum of 20 Kbps.
> >
> > I think I need to use frame-relay ip rtp priority 16384 16383 300 for
the
> > first requirement (in the map-class).
> > What about the second requirement ?
> >
> > Bye
> > .
> > ========================================================================
> > This email message is for the sole use of the intended recipient (s) and
> may
> > contain confidential and privileged information. Any unauthorized
review,
> > use, disclosure or distribution is prohibited. If you are not the
> intended
> > recipient, please contact the sender by reply email and destroy all
> copies
> > of the original message. To reply to our email administrator directly,
> send
> > an email to EmailAdmin@toysrus.com.
> > Toys "R" Us, Inc.
> > .
> .
> .
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:46 GMT-3