From: Jennifer Bellucci (Jennifer_bellucci@hotmail.com)
Date: Sat Nov 30 2002 - 21:57:41 GMT-3
If the router in question is c2500 or c2600, the instructions I sent u will
do fine
----- Original Message -----
From: "Lo Whitfield" <lwhitfield01@earthlink.net>
To: <ccie2b@cox.net>; <ccielab@groupstudy.com>
Sent: Sunday, December 01, 2002 12:34 AM
Subject: Re: IOS Upgrade
> Hello CCIE2b,
>
> You have to perform a format or erase on the flash pending on your version
> of the IOS. Then you have to perform a squeeze to free up the disk space.
>
> Good Luck,
>
> Lorenza
>
> ----- Original Message -----
> From: <ccie2b@cox.net>
> To: <ccielab@groupstudy.com>
> Sent: Saturday, November 30, 2002 6:56 PM
> Subject: IOS Upgrade
>
>
> > I am having a problem upgrading my IOS. I have 16M Flash and 16M
Memory.
> Here is the output of show ver:
> >
> > cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
> memory.
> > Processor board ID 02936846, with hardware revision 00000001
> > Bridging software.
> > X.25 software, Version 3.0.0.
> > Basic Rate ISDN software, Version 1.1.
> > 1 Ethernet/IEEE 802.3 interface(s)
> > 2 Serial network interface(s)
> > 8 Low-speed serial(sync/async) network interface(s)
> > 1 ISDN Basic Rate interface(s)
> > 32K bytes of non-volatile configuration memory.
> > 16384K bytes of processor board System flash (Read ONLY)
> >
> > When I try to do a copy tftp flash, I get the following message:
> > %Error: Image size exceeds free space
> >
> > The image I am trying to load is only 14,152KB in size. It seems that I
> do have enough space for this image, could anyone help to explain this?
> Thanks in advance...
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:37 GMT-3