From: Lo Whitfield (lwhitfield01@earthlink.net)
Date: Sat Nov 30 2002 - 21:34:55 GMT-3
Hello CCIE2b,
You have to perform a format or erase on the flash pending on your version
of the IOS. Then you have to perform a squeeze to free up the disk space.
Good Luck,
Lorenza
----- Original Message -----
From: <ccie2b@cox.net>
To: <ccielab@groupstudy.com>
Sent: Saturday, November 30, 2002 6:56 PM
Subject: IOS Upgrade
> I am having a problem upgrading my IOS. I have 16M Flash and 16M Memory.
Here is the output of show ver:
>
> cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of
memory.
> Processor board ID 02936846, with hardware revision 00000001
> Bridging software.
> X.25 software, Version 3.0.0.
> Basic Rate ISDN software, Version 1.1.
> 1 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 8 Low-speed serial(sync/async) network interface(s)
> 1 ISDN Basic Rate interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read ONLY)
>
> When I try to do a copy tftp flash, I get the following message:
> %Error: Image size exceeds free space
>
> The image I am trying to load is only 14,152KB in size. It seems that I
do have enough space for this image, could anyone help to explain this?
Thanks in advance...
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:37 GMT-3