From: Ali Marandi (ali.marandi@rogers.com)
Date: Sat Nov 30 2002 - 22:45:18 GMT-3
http://www.cisco.com/warp/customer/130/sw_upgrade_proc_flash.shtml
I hope it helps...
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
ccie2b@cox.net
Sent: Saturday, November 30, 2002 5:57 PM
To: ccielab@groupstudy.com
Subject: IOS Upgrade
I am having a problem upgrading my IOS. I have 16M Flash and 16M Memory.
Here is the output of show ver:
cisco 2522 (68030) processor (revision M) with 14336K/2048K bytes of memory.
Processor board ID 02936846, with hardware revision 00000001
Bridging software.
X.25 software, Version 3.0.0.
Basic Rate ISDN software, Version 1.1.
1 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
8 Low-speed serial(sync/async) network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
When I try to do a copy tftp flash, I get the following message:
%Error: Image size exceeds free space
The image I am trying to load is only 14,152KB in size. It seems that I do
have enough space for this image, could anyone help to explain this? Thanks
in advance...
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:37 GMT-3