3550 BGP Issue

From: jim.phillipo@guardent.com
Date: Mon Oct 21 2002 - 20:29:11 GMT-3

Next message: Leo Seto: "RE: null 0 once you configure summarising in ospf"
Previous message: Kris Keen: "Re: address-family"
Next in thread: Kris Keen: "Re: 3550 BGP Issue"
Maybe reply: Kris Keen: "Re: 3550 BGP Issue"
Maybe reply: Neil Evans (neievans): "RE: 3550 BGP Issue"
Maybe reply: Troy Rader: "Re: 3550 BGP Issue"
Maybe reply: MADMAN: "Re: 3550 BGP Issue"
Maybe reply: jim.phillipo@guardent.com: "RE: 3550 BGP Issue"
Maybe reply: Christopher M. Heffner: "RE: 3550 BGP Issue"
Maybe reply: Christopher M. Heffner: "RE: 3550 BGP Issue"
Maybe reply: Brian Dennis: "RE: 3550 BGP Issue"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Whats up with this ?

It appears that the command is ok but it will not take it ?

cat1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
cat1(config)#router bgp ?
<1-65535> Autonomous system number

cat1(config)#router bgp 4799 ?
<cr>

cat1(config)#router bgp 4799
Unknown routing protocol
cat1(config)#

Next message: Leo Seto: "RE: null 0 once you configure summarising in ospf"
Previous message: Kris Keen: "Re: address-family"
Next in thread: Kris Keen: "Re: 3550 BGP Issue"
Maybe reply: Kris Keen: "Re: 3550 BGP Issue"
Maybe reply: Neil Evans (neievans): "RE: 3550 BGP Issue"
Maybe reply: Troy Rader: "Re: 3550 BGP Issue"
Maybe reply: MADMAN: "Re: 3550 BGP Issue"
Maybe reply: jim.phillipo@guardent.com: "RE: 3550 BGP Issue"
Maybe reply: Christopher M. Heffner: "RE: 3550 BGP Issue"
Maybe reply: Christopher M. Heffner: "RE: 3550 BGP Issue"
Maybe reply: Brian Dennis: "RE: 3550 BGP Issue"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:53 GMT-3