From: Christopher M. Heffner (cheffner@certified-labs.net)
Date: Tue Oct 22 2002 - 19:37:47 GMT-3
Also just looked up on Cisco website in the release notes and you will
need the latest greatest version, 12.1(11)EA1 code. BGP supported was
added as of this version. Not available in the prior releases.
Hope this helps.
Christopher M. Heffner, CCIE, CCSI
Strategic Network Solutions, Inc.
cheffner@certified-labs.net
-----Original Message-----
From: jim.phillipo@guardent.com [mailto:jim.phillipo@guardent.com]
Sent: Tuesday, October 22, 2002 11:31 AM
To: troy@onenet.net; kkeen@bigpond.net.au
Cc: ccielab@groupstudy.com
Subject: RE: 3550 BGP Issue
I was running a older version of IOS that did not support BGP. I
upgraded
this morning and am up and running.
Thanks to all those who responded.
-----Original Message-----
From: Troy Rader [mailto:troy@onenet.net]
Sent: Monday, October 21, 2002 8:57 PM
To: Kris Keen
Cc: Jim Phillipo; ccielab@groupstudy.com
Subject: Re: 3550 BGP Issue
I am running BGP on a 3550 with EMI on this version of IOS:
c3550-i5q3l2-mz.121-11.EA1.bin.
Do you have 'ip routing' enabled? Just a guess. I haven't tried it.
Troy
Kris Keen wrote:
>I dont believe BGP is a supported protocol just yet, there was
discussion
on
>this earlier, further releases of IOS will bring BGP to be a supported
>protocol, Check CCO
>
>Cheers
>Kris
>----- Original Message -----
>From: <jim.phillipo@guardent.com>
>To: <ccielab@groupstudy.com>
>Sent: Tuesday, October 22, 2002 9:29 AM
>Subject: 3550 BGP Issue
>
>
>
>
>>Whats up with this ?
>>
>>It appears that the command is ok but it will not take it ?
>>
>>cat1#conf t
>>Enter configuration commands, one per line. End with CNTL/Z.
>>cat1(config)#router bgp ?
>> <1-65535> Autonomous system number
>>
>>cat1(config)#router bgp 4799 ?
>> <cr>
>>
>>cat1(config)#router bgp 4799
>>Unknown routing protocol
>>cat1(config)#
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:54 GMT-3