From: Jay (ccienxtyear@hotmail.com)
Date: Mon Oct 14 2002 - 14:16:01 GMT-3
Hi,
I have setup voip between 2 routers. Heres config for one of them (voice
specific config)
dial-peer voice 1 pots
destination-pattern 5555000
port 3/1/0
!
dial-peer voice 100 voip
destination-pattern T
session target ipv4:160.100.2.254
req-qos guaranteed-delay
ip precedence 5
!
num-exp 2400 5552400
num-exp 4000 5554000
So when I dial 2400 (or 5552400) and hit #, the other phone starts ringing
right away. If I just dial 2400 (or 5552400) without hitting #, it takes about
10 seconds before that phone rings. Is there a way to configure it to send the
digits right away instead of the 10 sec delay. I do not want to configure wild
cards such as using the dots.
thanks,
Jay
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3