From: Joseph Kimmer (jkimmer@cisco.com)
Date: Mon Oct 14 2002 - 14:59:59 GMT-3
look at interdigit delay... this will do what you're looking for
At 10:16 AM 10/14/2002 -0700, Jay wrote:
>Hi,
>
>I have setup voip between 2 routers. Heres config for one of them (voice
>specific config)
>
>dial-peer voice 1 pots
> destination-pattern 5555000
> port 3/1/0
>!
>dial-peer voice 100 voip
> destination-pattern T
> session target ipv4:160.100.2.254
> req-qos guaranteed-delay
> ip precedence 5
>!
>num-exp 2400 5552400
>num-exp 4000 5554000
>
>
>So when I dial 2400 (or 5552400) and hit #, the other phone starts ringing
>right away. If I just dial 2400 (or 5552400) without hitting #, it takes about
>10 seconds before that phone rings. Is there a way to configure it to send the
>digits right away instead of the 10 sec delay. I do not want to configure wild
>cards such as using the dots.
>
>thanks,
>Jay
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3