From: Ray Masbad (rmasbad@sbcglobal.net)
Date: Wed Oct 09 2002 - 15:21:48 GMT-3
You usually need to disable split horizon when running EIGRP in
frame-relay multipoint interface from what I understand.
Nathan Chessin wrote:
>I believe (ie I am not sure) that you have to manually disable split horizon
>on EIGRP with the no ip split-horiz eigrp # command.
>
>can anyone verify this?
>
>http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1828/products_conf
>iguration_guide_chapter09186a00800ca56e.html#xtocid14
>
>
>>-----Original Message-----
>>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
>>enginedrive2002
>>Sent: Tuesday, October 08, 2002 5:14 PM
>>To: ccielab@groupstudy.com
>>Subject: Re: Split Horizon??
>>
>>
>>As far as I know, once you enter 'encap frame' command,
>>split-horizon is
>>disable on that interface by default.
>>
>>E.D.
>>
>>----- Original Message -----
>>From: "D. Lee" <dongweylee1@attbi.com>
>>To: <ccielab@groupstudy.com>
>>Sent: October 8, 2002 2:41 PM
>>Subject: Help: Split Horizon??
>>
>>
>>>R1 is the Hub of Frame-Relay network, and R2, R3 are the
>>>
>>spoke routers.
>>
>>>They all use physical interfaces connect to each other, and
>>>
>>have EIGRP
>>running
>>
>>>in between.
>>>
>>>I use "sho ip interface serial x" command to check if split
>>>
>>horizon is
>>enabled
>>
>>>or disabled for any particular interface.
>>>
>>>If one of them said enabled and I have to disable it (for
>>>
>>some reason),
>>then I
>>
>>>enter "no ip split-horizon eigrp ##" under that interface.
>>>
>>I do "sho ip
>>
>>>interface serial x", and it still said enabled and nothing changed.
>>>
>>>If one of them said disabled and I have to enable it (for
>>>
>>some reason),
>>then I
>>
>>>enter "ip split-horizon eigrp ##" under that interface. I do "sho ip
>>>
>>interface
>>
>>>serial x", and it still said disabled and nothing changed.
>>>
>>>Is it supposed to work this way?? How do I know if
>>>
>>something is really
>>
>>>enabled/disabled?? Did I use the wrong command??
>>>
>>>Thanks for any feedback.
>>>
>>______________________________________________________________
>>________
>>Post your free ad now! http://personals.yahoo.ca
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:43 GMT-3