From: enginedrive2002 (enginedrive2002@yahoo.ca)
Date: Tue Oct 08 2002 - 21:14:29 GMT-3
As far as I know, once you enter 'encap frame' command, split-horizon is
disable on that interface by default.
E.D.
----- Original Message -----
From: "D. Lee" <dongweylee1@attbi.com>
To: <ccielab@groupstudy.com>
Sent: October 8, 2002 2:41 PM
Subject: Help: Split Horizon??
> R1 is the Hub of Frame-Relay network, and R2, R3 are the spoke routers.
> They all use physical interfaces connect to each other, and have EIGRP
running
> in between.
>
> I use "sho ip interface serial x" command to check if split horizon is
enabled
> or disabled for any particular interface.
>
> If one of them said enabled and I have to disable it (for some reason),
then I
> enter "no ip split-horizon eigrp ##" under that interface. I do "sho ip
> interface serial x", and it still said enabled and nothing changed.
>
> If one of them said disabled and I have to enable it (for some reason),
then I
> enter "ip split-horizon eigrp ##" under that interface. I do "sho ip
interface
> serial x", and it still said disabled and nothing changed.
>
> Is it supposed to work this way?? How do I know if something is really
> enabled/disabled?? Did I use the wrong command??
>
> Thanks for any feedback.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:43 GMT-3