From: Tony Huang (thuang@tdwaterhouse.com.au)
Date: Tue Oct 01 2002 - 22:19:07 GMT-3
Hi, Hunt,
Have you issued clear ip route * to restart OSPF?
Tony
-----Original Message-----
From: Hunt Lee [mailto:huntl@webcentral.com.au]
Sent: Wednesday, 2 October 2002 9:52 AM
To: 'ccielab@groupstudy.com'
Subject: URGENT - Help needed
Hello Group,
I was doing some reading on CCO this morning, and it stated that for OSPF
adjacency to work, if "ip unnumbered" is used, it must be used on both sides
of a link.
However, when I tried it, I managed to get OSPF still to form adjacency even
I have only used the "ip unnumbered" on one side of the link. Is CCO wrong?
Or am I missing something?
At RTA:
interface Loopback0
ip address 172.16.32.1 255.255.255.0
interface Serial0
ip unnumbered Loopback0
no fair-queue
clockrate 64000
At RTB:
interface Serial0
ip address 172.16.32.2 255.255.255.0
no fair-queue
But OSPF still works.... any ideas??
R2#sh ip ospf n
Neighbor ID Pri State Dead Time Address Interface
172.16.32.1 1 FULL/ - 00:00:39 172.16.32.1 Serial0
R2#
Hunt
DISCLAIMER: This e-mail and any files transmitted with it may contain information
that is confidential and privileged and is intended only for the use of the individual
or entity named above. If you are not the intended recipient of this message, you
are hereby notified that any use, dissemination, distribution or reproduction of this
e-mail is strictly prohibited. If you have received this e-mail in error, please notify
TD Waterhouse Investor Services Limited ABN 41 010 488 687 immediately by
return e-mail or telephone +61 2 9994 9000 and destroy the original message.
The content and opinions contained in this e-mail are not necessarily those of TD
Waterhouse. TD Waterhouse is a member of the Australian Stock Exchange Limited.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3