From: Hunt Lee (huntl@webcentral.com.au)
Date: Tue Oct 01 2002 - 20:51:38 GMT-3
Hello Group,
I was doing some reading on CCO this morning, and it stated that for OSPF
adjacency to work, if "ip unnumbered" is used, it must be used on both sides
of a link.
However, when I tried it, I managed to get OSPF still to form adjacency even
I have only used the "ip unnumbered" on one side of the link. Is CCO wrong?
Or am I missing something?
At RTA:
interface Loopback0
ip address 172.16.32.1 255.255.255.0
interface Serial0
ip unnumbered Loopback0
no fair-queue
clockrate 64000
At RTB:
interface Serial0
ip address 172.16.32.2 255.255.255.0
no fair-queue
But OSPF still works.... any ideas??
R2#sh ip ospf n
Neighbor ID Pri State Dead Time Address Interface
172.16.32.1 1 FULL/ - 00:00:39 172.16.32.1 Serial0
R2#
Hunt
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:36 GMT-3