From: kasturi cisco (kasturi_cisco@hotmail.com)
Date: Mon Sep 09 2002 - 17:01:06 GMT-3
Paul,
Without any IP addresses being allocated the OSPF process id wont be
active. Try allocating some IP address to the interface and then try
creating the OSPF process.
Good Luck,[IMAGE]
Kasturi.
>From: "Casey, Paul (6822)" >Reply-To: "Casey, Paul (6822)" >To:
"'ccielab@groupstudy.com'" >Subject: strange router issue. >Date: Mon, 9
Sep 2002 20:24:12 +0100 > >I have been working on a 2651 router for the
past few hours in a lab running >ospf. > >I finished a lab and erased the
configs and reloaded the routers. > >Now when I went to configure this
2651 router for ospf in this new lab I get >the following error. >
>Router1(config)#router ospf 100 >OSPF :Could not allocate router id >
>All other routing protocols seem to work fine.. I can't see what's
wrong.. > >Anyone any idea's >Kind regards. >Paul.
>-------------------------- >Sent from my BlackBerry Wireless Handheld >
>
>****************************************************************************************
> >This E-mail is from O2. The E-mail and any files >transmitted with it
are confidential and may also be privileged and intended >solely for the
use of the individual or entity to whom they are addressed. >Any
unauthorised direct or indirect dissemination, distribution or copying
>of this message and any attachments is strictly prohibited. If you have
>received the E-mail in error please notify postmaster@O2.com or >
telephone ++ 353 1 6095000. >
>*****************************************************************************************
>__________________________________________________________________ >To
unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: >unsubscribe ccielab
------------------------------------------------------------------------
MSN Photos is the easiest way to share and print your photos: Click Here
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3