From: Warner, Thomas S (thomas.s.warner@lmco.com)
Date: Mon Sep 09 2002 - 16:57:32 GMT-3
Paul
You need to have at least one interface on the router with an assigned IP
address and in an UP status in order for the OSPF process to start.
Tom
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Monday, September 09, 2002 3:24 PM
To: 'ccielab@groupstudy.com'
Subject: strange router issue.
I have been working on a 2651 router for the past few hours in a lab running
ospf.
I finished a lab and erased the configs and reloaded the routers.
Now when I went to configure this 2651 router for ospf in this new lab I get
the following error.
Router1(config)#router ospf 100
OSPF :Could not allocate router id
All other routing protocols seem to work fine.. I can't see what's wrong..
Anyone any idea's
Kind regards.
Paul.
--------------------------
Sent from my BlackBerry Wireless Handheld
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3