From: Lupi, Guy (Guy.Lupi@eurekaggn.com)
Date: Mon Sep 09 2002 - 16:52:28 GMT-3
Are there any interfaces up up with a valid IP address? The router will not
start an OSPF process unless there is an interface from which to assign the
router id, like a loopback. Try putting a loopback on there with a valid IP
address and then starting the OSPF configuration.
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: Monday, September 09, 2002 3:24 PM
To: 'ccielab@groupstudy.com'
Subject: strange router issue.
I have been working on a 2651 router for the past few hours in a lab running
ospf.
I finished a lab and erased the configs and reloaded the routers.
Now when I went to configure this 2651 router for ospf in this new lab I get
the following error.
Router1(config)#router ospf 100
OSPF :Could not allocate router id
All other routing protocols seem to work fine.. I can't see what's wrong..
Anyone any idea's
Kind regards.
Paul.
--------------------------
Sent from my BlackBerry Wireless Handheld
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3