From: Copleston Daniel (Daniel.Copleston@ukomfs.com)
Date: Mon Sep 09 2002 - 16:55:20 GMT-3
Paul,
Does the router have any IP addresses assigned to any interfaces yet? Unless
a valid active interface IP can be found (loopback or physical) OSPF will
not be able to initialise due to lack of a RID.
Regards,
Daniel Copleston
Network Analyst
Old Mutual Financial Services
-----Original Message-----
From: Casey, Paul (6822) [mailto:Paul.Casey@o2.com]
Sent: 09 September 2002 20:24
To: 'ccielab@groupstudy.com'
Subject: strange router issue.
I have been working on a 2651 router for the past few hours in a lab running
ospf.
I finished a lab and erased the configs and reloaded the routers.
Now when I went to configure this 2651 router for ospf in this new lab I get
the following error.
Router1(config)#router ospf 100
OSPF :Could not allocate router id
All other routing protocols seem to work fine.. I can't see what's wrong..
Anyone any idea's
Kind regards.
Paul.
--------------------------
Sent from my BlackBerry Wireless Handheld
****************************************************************************
************
This E-mail is from O2. The E-mail and any files
transmitted with it are confidential and may also be privileged and intended
solely for the use of the individual or entity to whom they are addressed.
Any unauthorised direct or indirect dissemination, distribution or copying
of this message and any attachments is strictly prohibited. If you have
received the E-mail in error please notify postmaster@O2.com or
telephone ++ 353 1 6095000.
****************************************************************************
*************
************************************************************************
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
If you have received this message in error, please notify the sender by
telephone (+44-20-7002-4000) and destroy the original message.
We reserve the right to monitor all e-mail messages passing through our
network.
************************************************************************
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:47 GMT-3