From: ccie2002@bellsouth.net
Date: Fri Sep 06 2002 - 15:00:53 GMT-3
Hello:
All I need a little help on my home lab. I am trying to get rip routes
to come thru on my tunnel while running another routing protocol outside
my tunnel. The problem I am having is that my tunnel comes up and
I can ping from my loopback with no problems. I am using my loopbacks on
each router as my tunnel source and tunnel destinations. However,
I do not see any rip routes going thru my tunnel. Also I can not
ping from Tunnel to Tunnel. However, I can ping from Tunnel
source and destination with no problems. My goal is to run
rip thru my tunnel while running another protocol outside of my tunnel.
Does anyone know what might be the problem. I have tried to change
the admin distance on rip to have router A and D use RIP but this did not
work. Any help ? I am a rookie.
Below is a basic diagram of what I am doing.
RIP
Tunnel Router A ------------------------------- Tunnel Router D
(eigrp) (ospf) ( ospf)
Router A-------- Router B-------Router C-----Router D
(Router A Below)
hostname cisco2504
!
enable password cisco
!
username cisco05 password 0 cisco
ip subnet-zero
no ip domain-lookup
ipx routing 0004.0004.0004
ipx internal-network 4444
isdn switch-type basic-dms100
!
key chain cisco
key 1
key-string cisco
!
!
!
!
!
interface Loopback0
ip address 150.3.7.7 255.255.255.0
no ip directed-broadcast
!
interface Loopback1
ip address 200.200.40.7 255.255.255.0
no ip directed-broadcast
!
interface Loopback3
ip address 10.10.9.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback4
ip address 10.10.10.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback5
ip address 10.10.11.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback6
ip address 10.10.12.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback7
ip address 10.10.13.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback8
ip address 10.10.14.1 255.255.255.252
no ip directed-broadcast
!
interface Loopback40
no ip address
no ip directed-broadcast
shutdown
!
interface Loopback800
ip address 159.159.159.159 255.255.255.0
no ip directed-broadcast
!
interface Loopback1000
ip address 190.190.190.1 255.255.255.0
ip rip send version 1 2
ip rip receive version 1 2
no ip directed-broadcast
!
interface Loopback2054
ip address 204.204.204.4 255.255.255.0
no ip directed-broadcast
!
interface Tunnel0
ip address 150.10.90.2 255.255.255.252
no ip directed-broadcast
ip rip send version 1 2
ip rip receive version 1 2
ipx network 2504
tunnel source Loopback1000
tunnel destination 140.168.3.3
!
interface Serial0
ip address 150.10.24.7 255.255.255.0
no ip directed-broadcast
encapsulation ppp
no ip mroute-cache
no fair-queue
!
interface Serial1
ip address 166.37.160.2 255.255.255.252
no ip directed-broadcast
encapsulation ppp
!
interface TokenRing0
ip address 79.79.79.1 255.255.255.0
no ip directed-broadcast
ipx network 16
interface BRI0
ip address 150.10.40.1 255.255.255.252
no ip directed-broadcast
encapsulation ppp
ip ospf message-digest-key 10 md5 cisco
ip ospf network point-to-point
shutdown
dialer-group 1
isdn switch-type basic-dms100
isdn spid1 3840200001 384020
ppp chap hostname cisco06
ppp chap password 7 14141B180F0B
hold-queue 75 in
!
router eigrp 1
redistribute bgp 1000
network 79.0.0.0
network 150.3.0.0
network 150.10.0.0
network 166.37.0.0
network 204.204.204.0
network 0.0.0.0
no auto-summary
router rip
version 2
network 150.10.0.0
network 166.37.0.0
network 190.190.0.0
distance 80
!
router bgp 1000
no synchronization
network 10.10.9.0 mask 255.255.255.252
network 10.10.10.0 mask 255.255.255.252
network 10.10.11.0 mask 255.255.255.252
network 10.10.12.0 mask 255.255.255.252
network 10.10.13.0 mask 255.255.255.252
network 10.10.14.0 mask 255.255.255.252
network 159.159.159.0 mask 255.255.255.0
network 200.200.40.0
aggregate-address 10.10.0.0 255.255.0.0 suppress-map NET10
neighbor 150.10.2.2 remote-as 22
neighbor 150.10.2.2 ebgp-multihop 2
neighbor 150.10.2.2 update-source Loopback1
neighbor 166.37.160.1 remote-as 22
neighbor 166.37.160.1 send-community
neighbor 166.37.160.1 route-map CISCO out
no auto-summary
!
ip classless
ip as-path access-list 1 permit AS1000 _1000_
!
!
ip prefix-list CISCO seq 5 permit 200.200.40.0/24
!
ip prefix-list NET10 seq 5 permit 10.10.9.0/30
ip prefix-list NET10 seq 10 deny 10.10.10.0/30
ip prefix-list NET10 seq 15 deny 10.10.11.0/30
ip prefix-list NET10 seq 20 deny 10.10.12.0/30
ip prefix-list NET10 seq 25 deny 10.10.13.0/30
ip prefix-list NET10 seq 30 deny 10.10.14.0/30
route-map AS1000 permit 10
match as-path 1
set as-path prepend 1000 1000 1000 1000
!
route-map CISCO permit 10
match ip address prefix-list CISCO
set community no-export
!
route-map NET10 permit 10
match ip address prefix-list NET10
!
!
!
!
Router D below
!
cisco3620#sh run
Building configuration...
Current configuration : 2564 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname cisco3620
!
enable password cisco
!
ip subnet-zero
!
!
no ip domain-lookup
!
ipx routing 0006.0006.0006
!
key chain cisco
key 1
key-string cisco
!
!
!
!
!
fax interface-type fax-mail
mta receive maximum-recipients 0
!
!
!
!
interface Loopback0
ip address 155.10.62.62 255.255.255.0
ip ospf network point-to-point
!
interface Loopback1
ip address 140.168.3.3 255.255.255.248
ip ospf network point-to-point
!
interface Loopback620
ip address 62.62.62.62 255.255.255.0
!
interface Loopback1000
ip address 170.170.12.1 255.255.255.0
!ip rip send version 1 2
ip rip receive version 1 2
interface Loopback3000
no ip address
ipx network 3000
!
interface Tunnel0
ip address 150.10.90.1 255.255.255.252
ip rip send version 1 2
ip rip receive version 1 2
ipx network 2504
tunnel source Loopback1000
tunnel destination 150.3.7.7
!
interface FastEthernet0/0
no ip address
duplex auto
speed auto
!
interface FastEthernet0/0.100
encapsulation isl 1
ip address 140.168.1.1 255.255.255.192
interface Serial0/0
ip address 150.10.10.9 255.255.255.240
encapsulation frame-relay
ip ospf message-digest-key 10 md5 cisco
ip ospf network point-to-multipoint
load-interval 30
no fair-queue
clockrate 2000000
frame-relay map ip 150.10.10.3 620 broadcast
no frame-relay inverse-arp
!
interface Serial0/1
no ip address
shutdown
clockrate 2000000
router ospf 1
router-id 6.6.6.6
log-adjacency-changes
area 5 authentication message-digest
area 5 virtual-link 155.10.5.5 authentication message-digest authentication-key
10
network 140.168.1.1 0.0.0.0 area 6
network 140.168.3.3 0.0.0.0 area 6
network 150.10.10.9 0.0.0.0 area 5
network 155.10.62.62 0.0.0.0 area 6
!
router rip
network 150.10.0.0
network 170.170.0.0
distance 80
!
router bgp 250
no synchronization
bgp log-neighbor-changes
bgp confederation identifier 22
network 62.62.62.0 mask 255.255.255.0
neighbor 150.10.10.3 remote-as 250
no auto-summary
cisco3620#show ip int brief
Interface IP-Address OK? Method Status Prot
ocol
FastEthernet0/0 unassigned YES NVRAM up up
FastEthernet0/0.100 140.168.1.1 YES NVRAM up up
Serial0/0 150.10.10.9 YES NVRAM up up
Serial0/1 unassigned YES NVRAM administratively down down
Loopback0 155.10.62.62 YES NVRAM up up
Loopback1 140.168.3.3 YES NVRAM up up
Loopback620 62.62.62.62 YES manual up up
Loopback1000 170.170.12.1 YES manual up up
Loopback3000 unassigned YES unset up up
Tunnel0 150.10.90.1 YES manual up up
cisco3620#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-J1S3-M), Version 12.2(8)T, RELEASE SOFTWARE (fc2)
TAC Support: http://www.cisco.com/tac
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Wed 13-Feb-02 22:13 by ccai
Image text-base: 0x60008930, data-base: 0x616F0000
ROM: System Bootstrap, Version 11.1(19)AA, EARLY DEPLOYMENT RELEASE SOFTWARE (fc
1)
cisco3620 uptime is 1 week, 53 minutes
System returned to ROM by reload
System image file is "flash:c3620-j1s3-mz.122-8.T.bin"
cisco 3620 (R4700) processor (revision 0x81) with 60416K/5120K bytes of memory.
Processor board ID 09917987
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
TN3270 Emulation software.
1 FastEthernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
2 Voice FXS interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read/Write)
cisco2504#show ip int brief
Interface IP-Address OK? Method Status Protocol
BRI0 150.10.40.1 YES manual administratively down down
BRI0:1 unassigned YES unset administratively down down
BRI0:2 unassigned YES unset administratively down down
Loopback0 150.3.7.7 YES manual up up
Loopback1 200.200.40.7 YES manual up up
Loopback3 10.10.9.1 YES manual up up
Loopback4 10.10.10.1 YES manual up up
Loopback5 10.10.11.1 YES manual up up
Loopback6 10.10.12.1 YES manual up up
Loopback7 10.10.13.1 YES manual up up
Loopback8 10.10.14.1 YES manual up up
Loopback40 unassigned YES unset administratively down down
Loopback800 159.159.159.159 YES manual up up
Loopback1000 190.190.190.1 YES manual up up
Loopback2054 204.204.204.4 YES manual up up
Serial0 150.10.24.7 YES manual up up
Serial1 166.37.160.2 YES manual up up
TokenRing0 79.79.79.1 YES manual up up
Tunnel0 150.10.90.2 YES manual up up
cisco250
cisco2504#sh ver
Cisco Internetwork Operating System Software
IOS (tm) 2500 Software (C2500-JOS56I-L), Version 12.0(4), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-1999 by cisco Systems, Inc.
Compiled Thu 15-Apr-99 01:26 by ccai
Image text-base: 0x0305719C, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT
WARE (fc1)
cisco2504 uptime is 1 week, 4 days, 13 hours, 40 minutes
System restarted by power-on
System image file is "flash:/2500entipsec.bin"
cisco 2500 (68030) processor (revision D) with 16384K/2048K bytes of memory.
Processor board ID 04899709, with hardware revision 00000000
Bridging software.
X.25 software, Version 3.0.0.
SuperLAT software copyright 1990 by Meridian Technology Corp).
TN3270 Emulation software.
Basic Rate ISDN software, Version 1.1.
1 Token Ring/IEEE 802.5 interface(s)
2 Serial network interface(s)
1 ISDN Basic Rate interface(s)
32K bytes of non-volatile configuration memory.
16384K bytes of processor board System flash (Read ONLY)
Configuration register is 0x2102
cisco250
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:45 GMT-3