From: Prakash H Somani (pdsccie@rediffmail.com)
Date: Fri Sep 06 2002 - 14:58:27 GMT-3
Dear friends....
I had faced this problem earlier also...and after seeing once
again I tried to simulate in the LAB...I could replicate the
problem....
"REBOOTED THE ROUTERS (BOTH NSSA ROUTERS) and it worked...I
remember last time also it worked in the same way....
Have u tried this ??
regards....Prakash
On Tue, 03 Sep 2002 Peter van Oene wrote :
>Any chance you will post the full type 7's on the NSSA ABR and
>the externals on the backbone box?
>
>At 01:00 PM 9/2/2002 -0500, Keith Steller wrote:
>>http://www.cisco.com/warp/public/104/ospfdb8.html
>>
>>What I want to see is the type 5 E1 route like in the example
>>above. Thats
>>my problem.
>>
>>Thanks,
>>
>>Keith
>>
>>-----Original Message-----
>> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
>>Behalf Of
>>Chris Larson
>>Sent: Monday, September 02, 2002 12:07 PM
>>To: Landon Fitts; Keith Steller; ccielab@groupstudy.com
>>Subject: Re: NSSA and type 7 LSA's -same problem. Configs
>>incl.
>>
>>
>>I am having a similiar issue with the same topo and config. Only
>>the IP
>>addresses are different and I am redistributing connected not
>>rip.
>>
>>The type 7 to the ABR is fine, but the ABR is not translating
>>the 7's into
>>5's for the rest of the OSPF domain.
>>
>>
>> redistributeConnected ------>R1(area 3
>>nssa)-----area3-----R2(area 3
>>nssa ABR)----------area0------------
>>
>>R1 is ASBR in area 3. R2 is ABR and has connection to area 0. R5
>>is in area
>>0 and does not have type 5 generated from R2.
>>
>>
>>R2#sh ip ospf dat ext
>>
>> OSPF Router with ID (200.0.0.2) (Process ID 1)
>>
>>
>> Type-5 AS External Link States
>>
>> Routing Bit Set on this LSA
>> LS age: 1905
>> Options: (No TOS-capability, DC)
>> LS Type: AS External Link
>> Link State ID: 150.50.4.0 (External Network Number )
>> Advertising Router: 200.0.0.8
>> LS Seq Number: 80000053
>> Checksum: 0xD7D8
>> Length: 36
>> Network Mask: /24
>> Metric Type: 2 (Larger than any link state path)
>> TOS: 0
>> Metric: 20
>> Forward Address: 0.0.0.0
>> External Route Tag: 0
>>
>>This is from a different area
>>
>>None of the other routers see any type 5's being generated from
>>R2.
>>
>>
>>
>>
>>
>>
>>R2#sh ip ospf dat nssa-external
>>
>> OSPF Router with ID (200.0.0.2) (Process ID 1)
>>
>>
>> Type-7 AS External Link States (Area 3)
>>
>> LS age: 127
>> Options: (No TOS-capability, No Type 7/5 translation, DC)
>> LS Type: AS External Link
>> Link State ID: 0.0.0.0 (External Network Number )
>> Advertising Router: 200.0.0.2
>> LS Seq Number: 80000002
>> Checksum: 0xEFF5
>> Length: 36
>> Network Mask: /0
>> Metric Type: 2 (Larger than any link state path)
>> TOS: 0
>> Metric: 1
>> Forward Address: 0.0.0.0
>> External Route Tag: 0
>>
>> LS age: 1810
>> Options: (No TOS-capability, No Type 7/5 translation, DC)
>> LS Type: AS External Link
>> Link State ID: 150.50.17.0 (External Network Number )
>> Advertising Router: 200.0.0.1
>> LS Seq Number: 80000002
>> Checksum: 0x346B
>> Length: 36
>> Network Mask: /24
>> Metric Type: 1 (Comparable directly to link state
>>metric)
>> TOS: 0
>> Metric: 20
>> Forward Address: 150.50.17.1
>> External Route Tag: 0
>>
>> LS age: 1813
>> Options: (No TOS-capability, No Type 7/5 translation, DC)
>> LS Type: AS External Link
>> Link State ID: 150.50.18.0 (External Network Number )
>> Advertising Router: 200.0.0.1
>> LS Seq Number: 80000002
>> Checksum: 0x2975
>> Length: 36
>> Network Mask: /24
>> Metric Type: 1 (Comparable directly to link state
>>metric)
>> TOS: 0
>> Metric: 20
>> Forward Address: 150.50.17.1
>> External Route Tag: 0
>>
>> Routing Bit Set on this LSA
>> LS age: 1557
>> Options: (No TOS-capability, No Type 7/5 translation, DC)
>> LS Type: AS External Link
>> Link State ID: 150.50.200.0 (External Network Number )
>> Advertising Router: 200.0.0.1
>> LS Seq Number: 80000004
>> Checksum: 0x3CAC
>> Length: 36
>> Network Mask: /22
>> Metric Type: 1 (Comparable directly to link state
>>metric)
>> TOS: 0
>> Metric: 20
>> Forward Address: 150.50.17.1
>> External Route Tag: 0
>>
>> Routing Bit Set on this LSA
>> LS age: 1821
>> Options: (No TOS-capability, No Type 7/5 translation, DC)
>> LS Type: AS External Link
>> Link State ID: 200.0.0.1 (External Network Number )
>> Advertising Router: 200.0.0.1
>> LS Seq Number: 80000002
>> Checksum: 0xB3FB
>> Length: 36
>> Network Mask: /32
>> Metric Type: 1 (Comparable directly to link state
>>metric)
>> TOS: 0
>> Metric: 20
>> Forward Address: 150.50.17.1
>> External Route Tag: 0
>>
>>
>>R5#sh ip ospf dat external
>>
>> OSPF Router with ID (200.0.0.5) (Process ID 1)
>>
>>
>> Type-5 AS External Link States
>>
>> Routing Bit Set on this LSA
>> LS age: 60
>> Options: (No TOS-capability, DC)
>> LS Type: AS External Link
>> Link State ID: 150.50.4.0 (External Network Number )
>> Advertising Router: 200.0.0.8
>> LS Seq Number: 80000054
>> Checksum: 0xD5D9
>> Length: 36
>> Network Mask: /24
>> Metric Type: 2 (Larger than any link state path)
>> TOS: 0
>> Metric: 20
>> Forward Address: 0.0.0.0
>> External Route Tag: 0
>>
>>
>>CONFIGS::
>>
>>
>>hostname R1
>>!
>>netbios access-list host nofile deny FIL*
>>!
>>no ip subnet-zero
>>no ip domain-lookup
>>ipx routing 0001.0001.0001
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 200.0.0.1 255.255.255.255
>> no ip directed-broadcast
>>!
>>interface Ethernet0
>> ip address 150.50.200.1 255.255.255.0
>> ip helper-address 1.1.1.1
>> ip helper-address 1.1.1.2
>> no ip directed-broadcast
>> no keepalive
>>!
>>interface Ethernet1
>> ip address 150.50.17.1 255.255.255.0
>> no ip directed-broadcast
>> ipx network 12
>> ipx netbios input-access-filter host nofile
>>!
>>interface Serial0
>> no ip address
>> no ip directed-broadcast
>> no ip mroute-cache
>> shutdown
>> no fair-queue
>>!
>>interface Serial1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>>!
>>interface Virtual-TokenRing0
>> ip address 150.50.18.1 255.255.255.0
>> no ip directed-broadcast
>> ip ospf network point-to-point
>> ring-speed 16
>>!
>>router ospf 1
>> area 3 nssa
>> summary-address 150.50.200.0 255.255.252.0
>> redistribute connected metric-type 1 subnets
>> network 150.50.17.0 0.0.0.255 area 3
>> network 150.50.18.0 0.0.0.255 area 3
>>!
>>ip nat translation timeout never
>>ip nat translation tcp-timeout never
>>ip nat translation udp-timeout never
>>ip nat translation finrst-timeout never
>>ip nat translation syn-timeout never
>>ip nat translation dns-timeout never
>>ip nat translation icmp-timeout never
>>ip classless
>>!
>>access-list 5 permit 200.0.0.1
>>access-list 5 permit 150.50.200.0 0.0.0.255
>>access-list 1001 deny FFFFFFFF 0
>>route-map conn permit 10
>> match ip address 5
>>!
>>route-map conn deny 20
>>!
>>!
>>!
>>!
>>ipx router eigrp 1
>> network 12
>>!
>>!
>>ipx router rip
>> no network all
>>!
>>!
>>!
>>!
>>line con 0
>> logging synchronous
>> transport input none
>>line aux 0
>>line vty 0 4
>> login
>>!
>>end
>>
>>
>>
>>hostname R2
>>!
>>!
>>memory-size iomem 20
>>ip subnet-zero
>>no ip domain-lookup
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 200.0.0.2 255.255.255.255
>> no ip directed-broadcast
>>!
>>interface FastEthernet0/0
>> ip address 150.50.17.2 255.255.255.0
>> no ip directed-broadcast
>>!
>>interface Serial0/0
>> no ip address
>> no ip directed-broadcast
>> encapsulation frame-relay
>> no ip mroute-cache
>> no fair-queue
>> clockrate 56000
>> frame-relay traffic-shaping
>> frame-relay class classmap
>>!
>>interface Serial0/0.1 point-to-point
>> ip address 150.50.24.2 255.255.255.0
>> no ip directed-broadcast
>> ip ospf network point-to-multipoint
>> frame-relay interface-dlci 104
>>!
>>interface Serial0/0.2 multipoint
>> ip address 150.50.100.2 255.255.255.224
>> no ip directed-broadcast
>> ip ospf message-digest-key 1 md5 cisco
>> ip ospf network non-broadcast
>> frame-relay map ip 150.50.100.5 105 broadcast
>> frame-relay map ip 150.50.100.6 106 broadcast
>>!
>>interface BRI0/0
>> no ip address
>> no ip directed-broadcast
>> shutdown
>>!
>>router ospf 1
>> network 150.50.17.0 0.0.0.255 area 3
>> network 150.50.24.0 0.0.0.255 area 1
>> network 150.50.100.0 0.0.0.31 area 0
>> network 200.0.0.2 0.0.0.0 area 100
>> neighbor 150.50.100.5
>> neighbor 150.50.100.6
>> area 0 authentication message-digest
>> area 1 stub no-summary
>> area 3 nssa default-information-originate
>>!
>>ip classless
>>no ip http server
>>!
>>!
>>map-class frame-relay classmap
>> frame-relay cir 58000
>> no frame-relay adaptive-shaping
>>!
>>!
>>line con 0
>> transport input none
>>line aux 0
>>line vty 0 4
>> login
>>!
>>no scheduler allocate
>>end
>>
>>
>>
>>
>>hostname R5
>>!
>>!
>>!
>>!
>>!
>>!
>>ip subnet-zero
>>no ip domain-lookup
>>!
>>cns event-service server
>>!
>>!
>>!
>>!
>>!
>>interface Loopback0
>> ip address 200.0.0.5 255.255.255.255
>> no ip directed-broadcast
>>!
>>interface Ethernet0
>> ip address 150.50.7.5 255.255.255.128
>> no ip directed-broadcast
>> ip ospf message-digest-key 1 md5 cisco
>>!
>>interface Serial0
>> ip address 150.50.100.5 255.255.255.224
>> no ip directed-broadcast
>> encapsulation frame-relay
>> ip ospf message-digest-key 1 md5 cisco
>> ip ospf priority 0
>> no ip mroute-cache
>> frame-relay map ip 150.50.100.2 501 broadcast
>> frame-relay map ip 150.50.100.6 501 broadcast
>> frame-relay lmi-type cisco
>>!
>>interface Serial1
>> no ip address
>> no ip directed-broadcast
>> shutdown
>>!
>>router ospf 1
>> area 0 authentication message-digest
>> network 150.50.7.0 0.0.0.127 area 0
>> network 150.50.100.0 0.0.0.31 area 0
>> network 200.0.0.5 0.0.0.0 area 100
>>!
>>ip classless
>>no ip http server
>>!
>>!
>>!
>>line con 0
>> transport input none
>>line aux 0
>>line vty 0 4
>>!
>>end
>>
>>
>>
>>
>>
>>
>>
>>----- Original Message -----
>> From: "Landon Fitts" <l.fitts@mindspring.com>
>>To: "Keith Steller" <ksteller@attbi.com>;
>><ccielab@groupstudy.com>
>>Sent: Monday, September 02, 2002 12:25 PM
>>Subject: Re: NSSA and type 7 LSA's
>>
>>
>> > Keith.
>> >
>> > This is correct behavior. The ASBR that is part of the NSSA
>>sends the RIP
>> > routes as LSA type 7 (N2/N1), but the ABR sends those LSAs
>>out as type 5
>> > (E2/E1) into the backbone. The type 7 LSAs are only
>>distributed within
>>the
>> > NSSA area.
>> >
>> > Landon
>> >
>> > ----- Original Message -----
>> > From: "Keith Steller" <ksteller@attbi.com>
>> > To: <ccielab@groupstudy.com>
>> > Sent: Monday, September 02, 2002 11:26 AM
>> > Subject: NSSA and type 7 LSA's
>> >
>> >
>> > > Hello All-
>> > >
>> > > I have a question for someone. I have an NSSA configured to
>>allow
>> > > redistibution of a few RIP routes into the OSPF net. I have
>>everything
>> > > working fine except for one thing. I can see the RIP
>>routes, denoted by
>> > the
>> > > N2 in the routing table on the ABR where the "Area X NSSA"
>>is
>>configured.
>> > I
>> > > dont see those type 7 routes being advertised to other
>>routers in the
>>OSPF
>> > > network though. I'm wondering if that's correct behavior. I
>>can get
>> > > connectivity to the RIP net (146.10.18.x) when I add the
>>"default
>> > > information originate always" on the ABR with the NSSA, as
>>he can see
>>the
>> > > RIP routes from there. With that configured, everyone sends
>>packets to
>>him
>> > > when they dont have a route available. Shouldnt the NSSA
>>allow the RIP
>> > > network to be advrtised to all routers in the OSPF network?
>>I attached
>>the
>> > > configs below. R1 is the ASBR with RIP and OSPF. R2 is the
>>other end of
>> > the
>> > > NSSA ABR (connected to Area 0), and R5 is also on th
>>backbone on area 0.
>> > >
>> > > Thanks for the assistance,
>> > >
>> > > Keith
>> > >
>> > > R1
>> > > !
>> > > router ospf 100
>> > > redistribute rip subnets
>> > > passive-interface TokenRing0
>> > > network 146.10.11.0 0.0.0.255 area 11
>> > > network 146.10.21.0 0.0.0.3 area 21
>> > > default-metric 5
>> > > area 11 range 146.10.11.0 255.255.255.0
>> > > area 21 nssa
>> > > !
>> > > router rip
>> > > version 1
>> > > redistribute ospf 100 metric 10
>> > > passive-interface Loopback100
>> > > passive-interface Serial1
>> > > network 146.10.0.0
>> > > neighbor 146.10.18.8
>> > > !
>> > > r1#sh ip route
>> > > Codes: C - connected, S - static, I - IGRP, R - RIP, M -
>>mobile, B - BGP
>> > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF
>>inter area
>> > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
>>external type 2
>> > > E1 - OSPF external type 1, E2 - OSPF external type
>>2, E - EGP
>> > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, *
>>- candidate
>> > > default
>> > > U - per-user static route, o - ODR
>> > >
>> > > Gateway of last resort is 146.10.21.2 to network 0.0.0.0
>> > >
>> > > 146.10.0.0/16 is variably subnetted, 6 subnets, 2
>>masks
>> > > C 146.10.18.0/24 is directly connected, TokenRing0
>> > > C 146.10.21.0/30 is directly connected, Serial1
>> > > C 146.10.11.0/24 is directly connected, Loopback100
>> > > R 146.10.88.0/24 [120/1] via 146.10.18.8, 00:00:17,
>>TokenRing0
>> > > R 146.10.78.0/24 [120/1] via 146.10.18.8, 00:00:17,
>>TokenRing0
>> > > C 146.10.118.0/24 is directly connected,
>>Loopback200
>> > > O*IA 0.0.0.0/0 [110/65] via 146.10.21.2, 00:12:41,
>>Serial1
>> > > r1#
>> > > ***************************************
>> > > R2
>> > > !
>> > > router ospf 100
>> > > network 146.10.10.0 0.0.0.255 area 0
>> > > network 146.10.21.0 0.0.0.3 area 21
>> > > network 146.10.22.0 0.0.0.255 area 22
>> > > neighbor 146.10.10.6 priority 1
>> > > neighbor 146.10.10.5 priority 5
>> > > default-information originate always
>> > > area 21 nssa default-information-originate no-summary
>> > > area 22 range 146.10.22.0 255.255.255.0
>> > > !
>> > >
>> > > r2#sh ip route
>> > > Codes: C - connected, S - static, I - IGRP, R - RIP, M -
>>mobile, B - BGP
>> > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF
>>inter area
>> > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
>>external type 2
>> > > E1 - OSPF external type 1, E2 - OSPF external type
>>2, E - EGP
>> > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, *
>>- candidate
>> > > default
>> > > U - per-user static route, o - ODR
>> > >
>> > > Gateway of last resort is not set
>> > >
>> > > 146.10.0.0/16 is variably subnetted, 12 subnets, 3
>>masks
>> > > C 146.10.24.0/24 is directly connected, Serial0.1
>> > > O N2 146.10.18.0/24 [110/5] via 146.10.21.1, 00:14:30,
>>Serial1
>> > > C 146.10.21.0/30 is directly connected, Serial1
>> > > C 146.10.22.0/24 is directly connected, Loopback100
>> > > C 146.10.10.0/24 is directly connected, Serial0
>> > > O N2 146.10.11.0/24 [110/5] via 146.10.21.1, 00:14:30,
>>Serial1
>> > > O IA 146.10.57.0/25 [110/74] via 146.10.10.6, 00:14:30,
>>Serial0
>> > > [110/74] via 146.10.10.5, 00:14:30,
>>Serial0
>> > > O IA 146.10.55.0/24 [110/65] via 146.10.10.5, 00:14:30,
>>Serial0
>> > > O N2 146.10.88.0/24 [110/5] via 146.10.21.1, 00:14:30,
>>Serial1
>> > > O N2 146.10.78.0/24 [110/5] via 146.10.21.1, 00:14:30,
>>Serial1
>> > > O IA 146.10.66.0/24 [110/65] via 146.10.10.6, 00:14:30,
>>Serial0
>> > > O N2 146.10.118.0/24 [110/5] via 146.10.21.1, 00:14:30,
>>Serial1
>> > > r2#
>> > > Type-7 AS External Link States (Area 21)
>> > >
>> > > Link ID ADV Router Age Seq#
>>Checksum Tag
>> > > 146.10.11.0 146.10.118.1 445 0x80000002
>>0xF944 0
>> > > 146.10.18.0 146.10.118.1 445 0x80000002
>>0xAC8A 0
>> > > 146.10.21.0 146.10.118.1 445 0x80000002
>>0x79BD 0
>> > > 146.10.78.0 146.10.118.1 445 0x80000002
>>0x16E4 0
>> > > 146.10.88.0 146.10.118.1 445 0x80000002
>>0xA749 0
>> > > 146.10.118.0 146.10.118.1 445 0x80000002
>>0x5C76 0
>> > > ****************************************************
>> > > R5
>> > > !
>> > > router ospf 100
>> > > network 146.10.10.0 0.0.0.255 area 0
>> > > network 146.10.55.0 0.0.0.255 area 55
>> > > network 146.10.57.0 0.0.0.127 area 57
>> > > neighbor 146.10.10.2 priority 10
>> > > area 55 range 146.10.55.0 255.255.255.0
>> > > !
>> > > r5#sh ip route
>> > > Codes: C - connected, S - static, I - IGRP, R - RIP, M -
>>mobile, B - BGP
>> > > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF
>>inter area
>> > > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA
>>external type 2
>> > > E1 - OSPF external type 1, E2 - OSPF external type
>>2, E - EGP
>> > > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, *
>>- candidate
>> > > default
>> > > U - per-user static route, o - ODR
>> > >
>> > > Gateway of last resort is 146.10.10.2 to network 0.0.0.0
>> > >
>> > > 146.10.0.0/16 is variably subnetted, 6 subnets, 3
>>masks
>> > > O IA 146.10.21.0/30 [110/128] via 146.10.10.2, 00:16:28,
>>Serial0.501
>> > > O IA 146.10.22.0/24 [110/65] via 146.10.10.2, 00:16:28,
>>Serial0.501
>> > > C 146.10.10.0/24 is directly connected, Serial0.501
>> > > C 146.10.57.0/25 is directly connected, Ethernet0
>> > > C 146.10.55.0/24 is directly connected, Loopback55
>> > > O IA 146.10.66.0/24 [110/65] via 146.10.10.6, 00:16:28,
>>Serial0.501
>> > > 146.100.0.0/24 is subnetted, 1 subnets
>> > > C 146.100.55.0 is directly connected, Loopback100
>> > > O*E2 0.0.0.0/0 [110/1] via 146.10.10.2, 00:16:21,
>>Serial0.501
>> > > r5#
>> > >
>>_________________________________________________________________
>> > > Commercial lab list:
>>http://www.groupstudy.com/list/commercial.html
>> > > Please discuss commercial lab solutions on this list.
>> >
>>_________________________________________________________________
>> > Commercial lab list:
>>http://www.groupstudy.com/list/commercial.html
>> > Please discuss commercial lab solutions on this list.
>>_________________________________________________________________
>>Commercial lab list:
>>http://www.groupstudy.com/list/commercial.html
>>Please discuss commercial lab solutions on this list.
>>_________________________________________________________________
>>Commercial lab list:
>>http://www.groupstudy.com/list/commercial.html
>>Please discuss commercial lab solutions on this list.
>_________________________________________________________________
>Commercial lab list:
>http://www.groupstudy.com/list/commercial.html
>Please discuss commercial lab solutions on this list.
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:45 GMT-3