From: Sean Xiao (sean_ccie@yahoo.com.cn)
Date: Fri Sep 06 2002 - 22:20:00 GMT-3
See your tunnel source and tunnel destination, where the
source of A should be the destination of D and vis-versa.
I think you should have found the problem now!
Sean
--- ccie2002@bellsouth.net 5DU}ND#:> Hello:
>
> All I need a little help on my home lab. I am trying to get rip routes
> to come thru on my tunnel while running another routing protocol outside
> my tunnel. The problem I am having is that my tunnel comes up and
> I can ping from my loopback with no problems. I am using my loopbacks on
> each router as my tunnel source and tunnel destinations. However,
> I do not see any rip routes going thru my tunnel. Also I can not
> ping from Tunnel to Tunnel. However, I can ping from Tunnel
> source and destination with no problems. My goal is to run
> rip thru my tunnel while running another protocol outside of my tunnel.
> Does anyone know what might be the problem. I have tried to change
> the admin distance on rip to have router A and D use RIP but this did not
> work. Any help ? I am a rookie.
>
>
> Below is a basic diagram of what I am doing.
>
>
>
> RIP
>
>
> Tunnel Router A ------------------------------- Tunnel Router D
>
>
>
> (eigrp) (ospf) ( ospf)
>
> Router A-------- Router B-------Router C-----Router D
>
>
>
>
> (Router A Below)
>
>
> hostname cisco2504
> !
> enable password cisco
> !
> username cisco05 password 0 cisco
> ip subnet-zero
> no ip domain-lookup
> ipx routing 0004.0004.0004
> ipx internal-network 4444
> isdn switch-type basic-dms100
> !
> key chain cisco
> key 1
> key-string cisco
> !
> !
> !
> !
> !
> interface Loopback0
> ip address 150.3.7.7 255.255.255.0
> no ip directed-broadcast
> !
> interface Loopback1
> ip address 200.200.40.7 255.255.255.0
> no ip directed-broadcast
> !
> interface Loopback3
> ip address 10.10.9.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback4
> ip address 10.10.10.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback5
> ip address 10.10.11.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback6
> ip address 10.10.12.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback7
> ip address 10.10.13.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback8
> ip address 10.10.14.1 255.255.255.252
> no ip directed-broadcast
> !
> interface Loopback40
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface Loopback800
> ip address 159.159.159.159 255.255.255.0
> no ip directed-broadcast
> !
> interface Loopback1000
> ip address 190.190.190.1 255.255.255.0
> ip rip send version 1 2
> ip rip receive version 1 2
>
>
> no ip directed-broadcast
> !
> interface Loopback2054
> ip address 204.204.204.4 255.255.255.0
> no ip directed-broadcast
> !
> interface Tunnel0
> ip address 150.10.90.2 255.255.255.252
> no ip directed-broadcast
> ip rip send version 1 2
> ip rip receive version 1 2
> ipx network 2504
> tunnel source Loopback1000
> tunnel destination 140.168.3.3
> !
> interface Serial0
> ip address 150.10.24.7 255.255.255.0
> no ip directed-broadcast
> encapsulation ppp
> no ip mroute-cache
> no fair-queue
> !
> interface Serial1
> ip address 166.37.160.2 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> !
> interface TokenRing0
> ip address 79.79.79.1 255.255.255.0
> no ip directed-broadcast
> ipx network 16
> interface BRI0
> ip address 150.10.40.1 255.255.255.252
> no ip directed-broadcast
> encapsulation ppp
> ip ospf message-digest-key 10 md5 cisco
> ip ospf network point-to-point
> shutdown
> dialer-group 1
> isdn switch-type basic-dms100
> isdn spid1 3840200001 384020
> ppp chap hostname cisco06
> ppp chap password 7 14141B180F0B
> hold-queue 75 in
> !
> router eigrp 1
> redistribute bgp 1000
> network 79.0.0.0
> network 150.3.0.0
> network 150.10.0.0
> network 166.37.0.0
> network 204.204.204.0
> network 0.0.0.0
> no auto-summary
> router rip
> version 2
> network 150.10.0.0
> network 166.37.0.0
> network 190.190.0.0
> distance 80
> !
> router bgp 1000
> no synchronization
> network 10.10.9.0 mask 255.255.255.252
> network 10.10.10.0 mask 255.255.255.252
> network 10.10.11.0 mask 255.255.255.252
> network 10.10.12.0 mask 255.255.255.252
> network 10.10.13.0 mask 255.255.255.252
> network 10.10.14.0 mask 255.255.255.252
> network 159.159.159.0 mask 255.255.255.0
> network 200.200.40.0
> aggregate-address 10.10.0.0 255.255.0.0 suppress-map NET10
> neighbor 150.10.2.2 remote-as 22
> neighbor 150.10.2.2 ebgp-multihop 2
> neighbor 150.10.2.2 update-source Loopback1
> neighbor 166.37.160.1 remote-as 22
> neighbor 166.37.160.1 send-community
> neighbor 166.37.160.1 route-map CISCO out
> no auto-summary
> !
> ip classless
> ip as-path access-list 1 permit AS1000 _1000_
> !
> !
> ip prefix-list CISCO seq 5 permit 200.200.40.0/24
> !
> ip prefix-list NET10 seq 5 permit 10.10.9.0/30
> ip prefix-list NET10 seq 10 deny 10.10.10.0/30
> ip prefix-list NET10 seq 15 deny 10.10.11.0/30
> ip prefix-list NET10 seq 20 deny 10.10.12.0/30
> ip prefix-list NET10 seq 25 deny 10.10.13.0/30
> ip prefix-list NET10 seq 30 deny 10.10.14.0/30
> route-map AS1000 permit 10
> match as-path 1
> set as-path prepend 1000 1000 1000 1000
> !
> route-map CISCO permit 10
> match ip address prefix-list CISCO
>
=== message truncated ===
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:43:46 GMT-3