Help needed on CAR

From: Hunt Lee (huntl@xxxxxxxxxxxxxxxxx)
Date: Wed Aug 28 2002 - 02:30:35 GMT-3

Next message: Bola Adegbonmire: "RE: CCIE#10030"
Previous message: Chris Hugo: "RE: Eigrp query problem"
Next in thread: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Omer Ansari: "Re: Help needed on CAR"
Maybe reply: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Chris Butler: "Re: Help needed on CAR"
Maybe reply: Dang Quang Minh: "Re: Help needed on CAR"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I have a Cisco 2621 and I want to limit the line speed on one of the
FastEthernet sub-interface to 1MBit / sec. I found a command regarding CAR
on CCO:-

interface FastEthernet3/0.598
rate-limit input <bps> <burst-normal> <burst-max> conform-action
transmit exceed-action drop
rate-limit output <bps> <burst-normal> <burst-max> conform-action
transmit exceed-action drop
But I am confused on what values do I have to put into <bps> <burst-normal>
<burst-max> to get it down to 1MB...
Also, is this the only line that I need to configure CAR?

N.B:- I'm using IOS Version 12.0(7)T2
Thanks so much for your help in advance,
Best Regards,
H.

Next message: Bola Adegbonmire: "RE: CCIE#10030"
Previous message: Chris Hugo: "RE: Eigrp query problem"
Next in thread: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Omer Ansari: "Re: Help needed on CAR"
Maybe reply: Nick Shah: "Re: Help needed on CAR"
Maybe reply: Chris Butler: "Re: Help needed on CAR"
Maybe reply: Dang Quang Minh: "Re: Help needed on CAR"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:40 GMT-3