Re: Help needed on CAR

From: Chris Butler (butlerc@xxxxxxxxxxxxxx)
Date: Thu Aug 29 2002 - 03:06:19 GMT-3

• Next message: Chris Butler: "Spanning Tree Root Election-How to stop it."
• Previous message: Chris Butler: "Re: Read Only Access For Telnet"
• Maybe in reply to: Hunt Lee: "Help needed on CAR"
• Next in thread: Dang Quang Minh: "Re: Help needed on CAR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
This will explain things quite nicely...

http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/qos_c/qc
part4/qcpolts.htm#xtocid241932
Good luck,

Chris
> Hello,
>
> I have a Cisco 2621 and I want to limit the line speed on one of the
> FastEthernet sub-interface to 1MBit / sec. I found a command regarding
> CAR on CCO:-
>
> interface FastEthernet3/0.598
> rate-limit input <bps> <burst-normal> <burst-max> conform-action
> transmit exceed-action drop
> rate-limit output <bps> <burst-normal> <burst-max> conform-action
> transmit exceed-action drop
> But I am confused on what values do I have to put into <bps>
> <burst-normal> <burst-max> to get it down to 1MB...
> Also, is this the only line that I need to configure CAR?
>
> N.B:- I'm using IOS Version 12.0(7)T2
> Thanks so much for your help in advance,
> Best Regards,
> H.

• Next message: Chris Butler: "Spanning Tree Root Election-How to stop it."
• Previous message: Chris Butler: "Re: Read Only Access For Telnet"
• Maybe in reply to: Hunt Lee: "Help needed on CAR"
• Next in thread: Dang Quang Minh: "Re: Help needed on CAR"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:41 GMT-3