From: Nick Shah (nshah@xxxxxxxxxxxxxx)
Date: Wed Aug 28 2002 - 03:17:24 GMT-3
Hunt
The ideal on Fast Ethernet is to have the burst-normal values to be 0.1875 *
bps, and burst max to be of (2 x 0.1875 x bps) .
On an ATM/ other (POS etc. ) you could have something like bps/2000 as burst
normal, and either same (if no burst required) or double of that for burst
max.
rgds
Nick
----- Original Message -----
From: "Hunt Lee" <huntl@webcentral.com.au>
To: <ccielab@groupstudy.com>
Sent: Wednesday, August 28, 2002 3:30 PM
Subject: Help needed on CAR
> Hello,
>
> I have a Cisco 2621 and I want to limit the line speed on one of the
> FastEthernet sub-interface to 1MBit / sec. I found a command regarding
CAR
> on CCO:-
>
> interface FastEthernet3/0.598
> rate-limit input <bps> <burst-normal> <burst-max> conform-action
> transmit exceed-action drop
> rate-limit output <bps> <burst-normal> <burst-max> conform-action
> transmit exceed-action drop
> But I am confused on what values do I have to put into <bps>
<burst-normal>
> <burst-max> to get it down to 1MB...
> Also, is this the only line that I need to configure CAR?
>
> N.B:- I'm using IOS Version 12.0(7)T2
> Thanks so much for your help in advance,
> Best Regards,
> H.
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:40 GMT-3