From: Volkov, Dmitry (Toronto - BCE) (dmitry_volkov@xxxxxxxxx)
Date: Mon Aug 12 2002 - 17:06:59 GMT-3
Hi,
I'm trying to do Solie's Darth Reid lab and I can't get FRTS working.
According to Lab requirement (page 1149 sect III, i.4):
"Configure FRTS on the PVC between R1 & R2 so that it responds to BECNS....,
etc"
R1 has one major serial 0 with two multipoint subinterfaces s0.1 and s0.2
s0.1 has PVC 110 to R2, s0.2 has PVCs 120 and 130 to the other routes via
cloud.
So I enabled FRTS on major interface and configured map-class and applied
it to s0.1 (there is only one DLCI there).
The same time doing like that I get default FRTS class-map on s0.2 with CIR
56000, etc.
So I don't understand how it is possible to "disable" FRTS on other subint
or particular DLCIs..
I can configure GTS on subint basis but not FRTS,
Did I miss something or Lab requirement is not correct ?
Thanks,
Dmitry
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:48:23 GMT-3