From: Groupstudy (groupstudy@xxxxxxxxxx)
Date: Sun Jul 28 2002 - 13:56:29 GMT-3
I have tested this as well and I have the same problem
Unless there is interesting traffic, the idle timeout will drop the link
then the dialer watch will bring it up again
i have tried increasing the dialer-watch delay but it doesnt help
the only workaround that i have is to increase the dialer idle-timeout
and hope that some interesting traffic will keep the link up
the problem with this is that if the primary routes get put back into the
routing table then you dont want the isdn link to stay up too long
----- Original Message -----
From: "Omer Ansari" <omer@ansari.com>
To: "ccie candidate" <ccie1@lycos.com>
Cc: <ccielab@groupstudy.com>
Sent: Sunday, July 28, 2002 7:52 AM
Subject: Re: dialer watch keeps resetting the link
> C,
> is this a dialer watch + callback scenario, where the router triggers the
> backup, which is then brought down and the remote side calls back?
>
> if so, I ran into this also..and i dont think this scenario would work
> unless someone proves me wrong
>
> On Sun, 28 Jul 2002, ccie candidate wrote:
>
> > folks ;
> > the dialer watch keeps resetting the link every "idle timeout "
> > it is supposed to recheck the link and if the primary is up ..the isdn
link remains up (is it this way) ..however the link every timeout goes down
and then comes up again .
> >
> > i removed ppp multilink ,dailer loadthreshold ..only one dialer watch
..however he problem remains ..
> >
> > i need help on this guys .
> >
> >
> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3