From: ccie candidate (ccie1@xxxxxxxxx)
Date: Sun Jul 28 2002 - 17:32:58 GMT-3
not only this ...the interesting traffic itself will keep the link up even aft
er the primary goes up .
i mean counting on the interesting traffic to reset the timer is not a solutio
n ..because after the primary link comes up again ..the intersting traffic agai
n will keep the link up indefentely .that is why i wanted only the dialer watc
h to be the only condition that keep hte link up or down .
i disbaled all the ip as interesting .assuming that the timer should be resette
d auto as long as the primary is down ..however this behaviour is strange .
--On Sun, 28 Jul 2002 12:56:29 Groupstudy wrote: >I have tested this as well and I have the same problem >Unless there is interesting traffic, the idle timeout will drop the link >then the dialer watch will bring it up again > >i have tried increasing the dialer-watch delay but it doesnt help >the only workaround that i have is to increase the dialer idle-timeout >and hope that some interesting traffic will keep the link up > >the problem with this is that if the primary routes get put back into the >routing table then you dont want the isdn link to stay up too long > > >----- Original Message ----- >From: "Omer Ansari" <omer@ansari.com> >To: "ccie candidate" <ccie1@lycos.com> >Cc: <ccielab@groupstudy.com> >Sent: Sunday, July 28, 2002 7:52 AM >Subject: Re: dialer watch keeps resetting the link > > >> C, >> is this a dialer watch + callback scenario, where the router triggers the >> backup, which is then brought down and the remote side calls back? >> >> if so, I ran into this also..and i dont think this scenario would work >> unless someone proves me wrong >> >> On Sun, 28 Jul 2002, ccie candidate wrote: >> >> > folks ; >> > the dialer watch keeps resetting the link every "idle timeout " >> > it is supposed to recheck the link and if the primary is up ..the isdn >link remains up (is it this way) ..however the link every timeout goes down >and then comes up again . >> > >> > i removed ppp multilink ,dailer loadthreshold ..only one dialer watch >..however he problem remains .. >> > >> > i need help on this guys . >> > >> > >> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3