From: Omer Ansari (omer@xxxxxxxxxx)
Date: Sun Jul 28 2002 - 14:45:14 GMT-3
C,
can you confirm you are using dialerwatch and callback in conjunction
here?
that is the only case i've seen similar behavior as yours. pure dialer
watch works fine for me.
On Sun, 28 Jul 2002, ccie candidate wrote:
> not only this ...the interesting traffic itself will keep the link up even a
fter the primary goes up .
>
> i mean counting on the interesting traffic to reset the timer is not a solut
ion ..because after the primary link comes up again ..the intersting traffic ag
ain will keep the link up indefentely .that is why i wanted only the dialer wa
tch to be the only condition that keep hte link up or down .
> i disbaled all the ip as interesting .assuming that the timer should be reset
ted auto as long as the primary is down ..however this behaviour is strange .
>
>
>
>
> --
>
> On Sun, 28 Jul 2002 12:56:29
> Groupstudy wrote:
> >I have tested this as well and I have the same problem
> >Unless there is interesting traffic, the idle timeout will drop the link
> >then the dialer watch will bring it up again
> >
> >i have tried increasing the dialer-watch delay but it doesnt help
> >the only workaround that i have is to increase the dialer idle-timeout
> >and hope that some interesting traffic will keep the link up
> >
> >the problem with this is that if the primary routes get put back into the
> >routing table then you dont want the isdn link to stay up too long
> >
> >
> >----- Original Message -----
> >From: "Omer Ansari" <omer@ansari.com>
> >To: "ccie candidate" <ccie1@lycos.com>
> >Cc: <ccielab@groupstudy.com>
> >Sent: Sunday, July 28, 2002 7:52 AM
> >Subject: Re: dialer watch keeps resetting the link
> >
> >
> >> C,
> >> is this a dialer watch + callback scenario, where the router triggers the
> >> backup, which is then brought down and the remote side calls back?
> >>
> >> if so, I ran into this also..and i dont think this scenario would work
> >> unless someone proves me wrong
> >>
> >> On Sun, 28 Jul 2002, ccie candidate wrote:
> >>
> >> > folks ;
> >> > the dialer watch keeps resetting the link every "idle timeout "
> >> > it is supposed to recheck the link and if the primary is up ..the isdn
> >link remains up (is it this way) ..however the link every timeout goes down
> >and then comes up again .
> >> >
> >> > i removed ppp multilink ,dailer loadthreshold ..only one dialer watch
> >..however he problem remains ..
> >> >
> >> > i need help on this guys .
> >> >
> >> >
> >> >
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:47 GMT-3