From: Joe (GroupStudy@xxxxxxxxxxx)
Date: Tue Jul 30 2002 - 00:31:41 GMT-3
Dialer watch is not resetting the link, the router on the other end is. Try
bumping up it's idle timer to a long value. This does not pose a problem
for dialerwatch because when the watched route returns dialer watch will
'nail' the link back down until the route disappears again.
Joe
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
ccie candidate
Sent: Sunday, July 28, 2002 5:28 AM
To: ccielab@groupstudy.com
Subject: dialer watch keeps resetting the link
folks ;
the dialer watch keeps resetting the link every "idle timeout "
it is supposed to recheck the link and if the primary is up ..the isdn link
remains up (is it this way) ..however the link every timeout goes down and
then comes up again .
i removed ppp multilink ,dailer loadthreshold ..only one dialer watch
..however he problem remains ..
i need help on this guys .
This archive was generated by hypermail 2.1.4 : Sat Sep 07 2002 - 19:36:48 GMT-3