RE: CAT 5505 upgrade failure

From: Ian.C.Stong@xxxxxxxxxxxxxxx
Date: Fri May 17 2002 - 12:55:22 GMT-3

   
You should try upgrading incrementally. It's mentioned in the upgrade
notes which specific versions to upgrade to in each step. Upgrade to
version 3.2(3) first, reboot then upgrade to 4.5x.

Thanks,

Ian

-----Original Message-----
From: ccie1 [mailto:ccie1@lycos.com]
Sent: Friday, May 17, 2002 10:15 AM
To: ccielab
Subject: CAT 5505 upgrade failure

 guys ;

i had a 5505 with sup II ,16MRAM and 8 flash , im trying to upgrade it
from 3.12 to 4.5 , but it didnt work .
i checked the documentation and the memory seem to be enough , there are
also two commands "download" and "copy tftp flash" both seem to work
fine..however in the documentation they recommend "download" for sup II
.

after the switch finish download the images ..and reboot automatically (
i dont know why) ..the show version command shows the same old 3.12
image ..and before that it gives an error ...i can post it in case
anyone wants to help..

what am i missing here ??? 

--

On Wed, 15 May 2002 04:06:35
 David Lee Steele, Jr. wrote:
>Does this help?
>
>http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800r
l
>nts/docrlsnt.htm#62991
>
>David
>
>-----Original Message-----
>From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
>Tom Young
>Sent: Wednesday, May 15, 2002 3:32 AM
>To: ccielab@groupstudy.com
>Subject: A question about wr
>
>I want to write mem, and got some message as below,it is
>Cisco813,
>
>TANAKA#wr
>Building configuration...
>
>WARNING: no valid "boot system" command. TinyROM will
>pick an IOS image to boot.
>[OK]
>
>The result is ok, but what 's the means of this message,
>and how to deal it is what I want to know.I tried to erase
>mem, erase nvram, but no helpful.
>
>Thanks alot
>
>Young
>

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3