From: Bill.E.Riddiford@xxxxxxx
Date: Fri May 17 2002 - 12:09:49 GMT-3
If I remember correctly , you had to go to version 4.3 first.
check CCO
Bill
"ccie
candidate"
<ccie1@lycos.c
om> To: ccielab
Sent by: cc:
nobody@groupst Subject: CAT 5505 upgrade failure
udy.com
17-May-2002
16:14
Please respond
to "ccie
candidate"
<ccie1@lycos.c
om>
guys ;
i had a 5505 with sup II ,16MRAM and 8 flash , im trying to upgrade it
from 3.12 to 4.5 , but it didnt work .
i checked the documentation and the memory seem to be enough , there are
also two commands "download" and "copy tftp flash" both seem to work
fine..however in the documentation they recommend "download" for sup II .
after the switch finish download the images ..and reboot automatically ( i
dont know why) ..the show version command shows the same old 3.12 image
..and before that it gives an error ...i can post it in case anyone wants
to help..
what am i missing here ???
--On Wed, 15 May 2002 04:06:35 David Lee Steele, Jr. wrote: >Does this help? > >http://www.cisco.com/univercd/cc/td/doc/product/access/acs_fix/800/800rl >nts/docrlsnt.htm#62991 > >David > >-----Original Message----- >From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of >Tom Young >Sent: Wednesday, May 15, 2002 3:32 AM >To: ccielab@groupstudy.com >Subject: A question about wr > >I want to write mem, and got some message as below,it is >Cisco813, > >TANAKA#wr >Building configuration... > >WARNING: no valid "boot system" command. TinyROM will >pick an IOS image to boot. >[OK] > >The result is ok, but what 's the means of this message, >and how to deal it is what I want to know.I tried to erase >mem, erase nvram, but no helpful. > >Thanks alot > >Young >
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:59 GMT-3