AGS+ Serial interfaces

From: Ian.C.Stong@xxxxxxxxxxxxxxx
Date: Tue Apr 30 2002 - 08:31:21 GMT-3

• Next message: Church, Chuck: "RE: CCIE #9240"
• Previous message: Bhisham Bajaj: "ATM"
• Next in thread: Michael Snyder: "RE: AGS+ Serial interfaces"
• Maybe reply: Michael Snyder: "RE: AGS+ Serial interfaces"
• Maybe reply: Stephen C. Feldberg: "Re: AGS+ Serial interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

   
I have an AGS that I'm trying to use as a Frame Relay switch. None of
the 10 serial interfaces will show up/up. They all show line up and
protocol down. I even tried a point to point between AGS and 2501
router using hdlc encapsulation and same affect. It's not a basic issue
like clock rate, dte/dce etc.

I found some Cisco documentation that talks about moving some jumpers
around for dte versus dce.... Does anyone out there have an AGS and if
so have you experienced a similar issue?

Thanks,

• Next message: Church, Chuck: "RE: CCIE #9240"
• Previous message: Bhisham Bajaj: "ATM"
• Next in thread: Michael Snyder: "RE: AGS+ Serial interfaces"
• Maybe reply: Michael Snyder: "RE: AGS+ Serial interfaces"
• Maybe reply: Stephen C. Feldberg: "Re: AGS+ Serial interfaces"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:22 GMT-3