From: Jeff Duchin (jduchin@xxxxxxxxxx)
Date: Thu Apr 11 2002 - 17:41:14 GMT-3
What's it show for the other vlans, if any?
Jeff
Jeff Duchin
Design Engineer
WAM!NET Atlantic Region
13600 EDS Drive, 5N-A47
Herndon, VA 20171
Office: (703) 736-4083
Mobile: (301) 305-0122
Fax: (703) 904-4012
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
Williams, Glenn
Sent: Thursday, April 11, 2002 3:26 PM
To: 'ccielab@groupstudy.com'
Subject: spanning tree
Anyone explain why I see incorrect root port and mac address on some
switches as below. It says spanning tree is enabled. But does not know
root. This switch is access switch, single connection to distribution
switch which is the root.
sh spantree
VLAN 1
Spanning tree enabled
Spanning tree type ieee
Designated Root 00-00-00-00-00-00
Designated Root Priority 0
Designated Root Cost 0
Designated Root Port 1/0
TIA
GW
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:05 GMT-3