From: Manny Gonzalez (gonzalu@xxxxxxx)
Date: Thu Apr 11 2002 - 17:50:19 GMT-3
I have seen this behaviour also with stuff connected to the VLAN as well.
Edmund Roche-Kelly wrote:
>
> You don't have any connected ports in vlan 1.
>
> "Williams, Glenn" wrote:
> >
> > Anyone explain why I see incorrect root port and mac address on some
> > switches as below. It says spanning tree is enabled. But does not know
> > root. This switch is access switch, single connection to distribution
> > switch which is the root.
> >
> > sh spantree
> > VLAN 1
> > Spanning tree enabled
> > Spanning tree type ieee
> >
> > Designated Root 00-00-00-00-00-00
> > Designated Root Priority 0
> > Designated Root Cost 0
> > Designated Root Port 1/0
> >
> > TIA
> > GW
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:58:05 GMT-3