From: Richard Furda (riso@xxxxxxxxx)
Date: Sun Apr 07 2002 - 12:08:42 GMT-3
Hey there,
On Sun, 7 Apr 2002, Ahmed Mamoor Amimi wrote:
> I was also not able to do this with dynamic routing... Which IOS version are
> u using. Cisco says that Dialer-watch was unstable till 12.1(7)T .... i guess
.
R5#sh ver | inc IOS
IOS (tm) 2500 Software (C2500-JS-L), Version 12.1(1), RELEASE SOFTWARE (fc1)
R5#
> Also from the group i got that it only works fine with OSPF and EIGRP.
cool! glad to hear! :)
> -Mamoor
>
>
> ----- Original Message -----
> From: Richard Furda <riso@furda.net>
> To: <ccielab@groupstudy.com>
> Sent: Sunday, April 07, 2002 7:34 PM
> Subject: dialer watch
>
>
> > Hello,
> >
> > I've been reviewing and playing with every possible ISDN/DDR know there
> > is. Dialer watch seems to stumble me a bit. If I have a configuration
> > such:
> >
> > interface BRI0
> > ip address 10.10.10.5 255.255.255.0
> > encapsulation ppp
> > dialer watch-disable 15
> > dialer map ip 10.20.30.0 name R3 broadcast 44642773
> > dialer watch-group 2
> > dialer-group 1
> > isdn switch-type basic-net3
> > isdn answer1 44642771
> > no cdp enable
> > ppp authentication chap
> > !
> > access-list 1 permit 10.10.10.0 0.0.0.255
> > dialer-list 1 protocol ip list 1
> > dialer watch-list 2 ip 10.20.30.0 0.0.0.255
> > ! interface Ethernet0
> > ip address 10.20.30.1 255.255.255.0
> > no keepalive
> > !
> >
> >
> > Shutting down e0 should make dialer watch initiate a call? it doesn't.
> > If I create a eigrp routing process and make 10.20.30/24 part of that
> > network, dialer watch kicks in. Searching the mailing list archives
> > and the cisco web, I've not found any specific reference of dialer watch
> > working with dynamic routes ONLY. Please correct me if I am wrong.
> >
> > Thanks,
> > Rich
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:59 GMT-3