dialer watch

From: Richard Furda (riso@xxxxxxxxx)
Date: Sun Apr 07 2002 - 11:34:02 GMT-3

Next message: Ahmed Mamoor Amimi: "Re: Lab Tomorrow! Need Help"
Previous message: Ali: "Q. eigrp/igrp red"
Next in thread: Ahmed Mamoor Amimi: "Re: dialer watch"
Maybe reply: Ahmed Mamoor Amimi: "Re: dialer watch"
Maybe reply: Richard Furda: "Re: dialer watch"
Maybe reply: tom cheung: "Re: dialer watch"
Maybe reply: Richard Furda: "Re: dialer watch"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Hello,

I've been reviewing and playing with every possible ISDN/DDR know there
is. Dialer watch seems to stumble me a bit. If I have a configuration
such:

interface BRI0
ip address 10.10.10.5 255.255.255.0
encapsulation ppp
dialer watch-disable 15
dialer map ip 10.20.30.0 name R3 broadcast 44642773
dialer watch-group 2
dialer-group 1
isdn switch-type basic-net3
isdn answer1 44642771
no cdp enable
ppp authentication chap
!
access-list 1 permit 10.10.10.0 0.0.0.255
dialer-list 1 protocol ip list 1
dialer watch-list 2 ip 10.20.30.0 0.0.0.255
! interface Ethernet0
ip address 10.20.30.1 255.255.255.0
no keepalive
!

Shutting down e0 should make dialer watch initiate a call? it doesn't.
If I create a eigrp routing process and make 10.20.30/24 part of that
network, dialer watch kicks in. Searching the mailing list archives
and the cisco web, I've not found any specific reference of dialer watch
working with dynamic routes ONLY. Please correct me if I am wrong.

Thanks,
Rich

Next message: Ahmed Mamoor Amimi: "Re: Lab Tomorrow! Need Help"
Previous message: Ali: "Q. eigrp/igrp red"
Next in thread: Ahmed Mamoor Amimi: "Re: dialer watch"
Maybe reply: Ahmed Mamoor Amimi: "Re: dialer watch"
Maybe reply: Richard Furda: "Re: dialer watch"
Maybe reply: tom cheung: "Re: dialer watch"
Maybe reply: Richard Furda: "Re: dialer watch"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:59 GMT-3