From: Giveortake@xxxxxxx
Date: Wed Apr 03 2002 - 22:47:09 GMT-3
Is it possible to do PPP callback with dialer profiles?
Initially on the callback server I put the bare minimum on the physical BRI
interface.
int bri0
encapsulation ppp
dialer pool-member 1
isdn switch type
spid1
spid2
interface dialer 1
ip address
encapsulation ppp
dialer remote-name R5
dialer callback-secure
dialer string xxxxxxx class cback
dialer pool 1
dialer-group 1
ppp callback accept
ppp authentication chap
ppp chap hostname R2
ppp chap password xxxxx
map-class dialer cback
dialer callback server username
dilaer-list 1 protocol ip permit
I found that when I did not put PPP authentication, the called router above
did not authenticate even though I had ppp authentication chap configured
under the interface dialer. The callback server also did not recognize
that it was supposed to call back and the connection was allowed.. So I
then put ppp authenticatin chap under the BRI0 and it did a two way
authentication, but no callback.
Thus I am wondering if it is even possible??????????? I found no such
examples on CCO.....
Thanks,
David
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:53 GMT-3