From: steven.j.nelson@xxxxxx
Date: Wed Apr 03 2002 - 17:53:11 GMT-3
All
I have the following :-
R1---------------------------R2-----------------R3
(Area 100) (Area 100,Area 10) (Area 10, Area 0)
I have MD 5 authentication running in area 0, I know that for a virtual link
to work across a transit area that connects to area 0 where there is
authentication running, that you have to have authentication running on the
virtual link.
My question is this :-
Is it enough to have the command area 0 authentication message-digest
confgured under R1's routing process and the relevant passwords on the
links, or do I have to run a separate MD 5 process across the transit area
and have the passwords match across the board.
Any help would be good.
Cheers
Steve
Steve Nelson
Customer Engineer
BT Ignite- National Solutions
T: +44 (0)1422 338881 M: +44 (0)7811 944172
e-mail: steven.j.nelson@bt.com
pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
> British Telecommunications plc
> Registered office: 81 Newgate Street London EC1A 7AJ
> Registered in England no. 1800000.
> This electronic message contains information from British
Telecommunications plc which may be privileged or confidential. The
information is intended to be for the use of the individual(s) or entity
named above. If you are not the intended recipient be aware that any
disclosure, copying, distribution or use of the contents of this information
is prohibited. If you have received this electronic message in error, please
notify us by telephone or email (to the numbers or address above)
immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:53 GMT-3