From: Peter van Oene (pvo@xxxxxxxxxxxx)
Date: Thu Apr 04 2002 - 03:06:06 GMT-3
Ack.. sorry about that.. meant to say Area 10 doesn't need to use..
At 04:45 PM 4/3/2002 -0500, Peter van Oene wrote:
>Hey Steven,
>
>If the question is, can you run Area 0 with authentication while using a
>virtual links through transit areas that are not authenticated, the answer
>is yes. In your picture, Area 10 need to utilize authentication for this
>to work.
>
>Pete
>
>
>At 09:53 PM 4/3/2002 +0100, steven.j.nelson@bt.com wrote:
>>All
>>
>>I have the following :-
>>
>> R1---------------------------R2-----------------R3
>>(Area 100) (Area 100,Area 10) (Area 10, Area 0)
>>
>>I have MD 5 authentication running in area 0, I know that for a virtual link
>>to work across a transit area that connects to area 0 where there is
>>authentication running, that you have to have authentication running on the
>>virtual link.
>>
>>My question is this :-
>>
>>Is it enough to have the command area 0 authentication message-digest
>>confgured under R1's routing process and the relevant passwords on the
>>links, or do I have to run a separate MD 5 process across the transit area
>>and have the passwords match across the board.
>>
>>Any help would be good.
>>
>>Cheers
>>
>>Steve
>>
>>Steve Nelson
>>Customer Engineer
>>BT Ignite- National Solutions
>>T: +44 (0)1422 338881 M: +44 (0)7811 944172
>>e-mail: steven.j.nelson@bt.com
>>pp HW A170, PO Box 200(HOM-NZ), London, N18 1ZF
>> > British Telecommunications plc
>> > Registered office: 81 Newgate Street London EC1A 7AJ
>> > Registered in England no. 1800000.
>> > This electronic message contains information from British
>>Telecommunications plc which may be privileged or confidential. The
>>information is intended to be for the use of the individual(s) or entity
>>named above. If you are not the intended recipient be aware that any
>>disclosure, copying, distribution or use of the contents of this information
>>is prohibited. If you have received this electronic message in error, please
>>notify us by telephone or email (to the numbers or address above)
>>immediately.
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:57:54 GMT-3