From: David (david_knot@xxxxxxxxx)
Date: Mon Mar 04 2002 - 15:20:37 GMT-3
I'm having issues setting up Cat 4K with L3 module.
This are the modules:
Switching Supervisor - WS-X4012
Router Switch Card - WS-X4232-L3
L3 module did not seem to have IOS so I ran Xmodem to
put cat4232-in-mz.120-18.W5.22a.bin IOS file on. That
seem to go OK but when resstarted the box, I got the
output below. Any ideas what's going on i.e. why no
CLI is present??
Compiled Fri 09-Jun-00 10:17 by wkassa
Diagnostic Software (MARINA-DIAG), Version 1.4(1)
[wkassa j_conn]
Copyright (c) Cisco Systems Inc. 1998-1999
MARINA>1%
ROMMON: Entered init
ROMMON: Cold Reset frame @0x00000000
ROMMON: Reading reset reason register
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE
SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main
memory
Initialize MMC diag test driver
Marina system recognized.
NP54 0, XPIF Ver.1 Port 0 at 1244 M
NP54 0, XPIF Ver.1 Port 1 at 1244 M
NP54 2, XPIF Ver.1 Port 0 at 1244 M
NP54 2, XPIF Ver.1 Port 1 at 1244 M
****** Spawn status register polling task ******
fpga_ucode begin from 0x8019fe28
FPGA_DNLD completed
Thermostat #0: config reg reads 0x0a
Thermostat #1: config reg reads 0xff
Booting on Dec 31 1999 23:59:59
Compiled Fri 09-Jun-00 10:17 by wkassa
Diagnostic Software (MARINA-DIAG), Version 1.4(1)
[wkassa j_conn]
Copyright (c) Cisco Systems Inc. 1998-1999
MARINA>1%
ROMMON: Entered init
ROMMON: Cold Reset frame @0x00000000
ROMMON: Reading reset reason register
ROMMON: Valid NVRAM config
System Bootstrap, Version 12.0(7)W5(15b) RELEASE
SOFTWARE
Copyright (c) 2000 by cisco Systems, Inc.
ROMMON: Initializing exceptions
ROMMON: Initializing TLB
ROMMON: Initializing cache
ROMMON: Sizing and zeroing main memory ... 64 MBytes
ROMMON: Sizing non-volatile memory ... 128 KBytes
ROMMON: Exiting init
Catalyst-4232 platform with 65536 Kbytes of main
memory
Initialize MMC diag test driver
Marina system recognized.
NP54 0, XPIF Ver.1 Port 0 at 1244 M
NP54 0, XPIF Ver.1 Port 1 at 1244 M
NP54 2, XPIF Ver.1 Port 0 at 1244 M
NP54 2, XPIF Ver.1 Port 1 at 1244 M
****** Spawn status register polling task ******
fpga_ucode begin from 0x8019fe28
FPGA_DNLD completed
Thermostat #0: config reg reads 0x0a
Thermostat #1: config reg reads 0xff
Booting on Dec 31 1999 23:59:59
Compiled Fri 09-Jun-00 10:17 by wkassa
Diagnostic Software (MARINA-DIAG), Version 1.4(1)
[wkassa j_conn]
Copyright (c) Cisco Systems Inc. 1998-1999
MARINA>1%
This archive was generated by hypermail 2.1.4 : Thu Jun 13 2002 - 10:56:52 GMT-3